Dynamic behaviour improvement for a torus milling cutter using balance of the transversal cutting force

被引：0
|
作者：
Gilles, Patrick [1 ]
Cohen, Guillaume [1 ]
Monies, Frederic [1 ]
Rubio, Walter [1 ]
机构：
[1] Laboratoire de Génie Mécanique, Filière de Génie Mécanique, Bât. 3PN, 118 route de Narbonne, Toulouse Cedex 4 31062, France
来源：
International Journal of Advanced Manufacturing Technology | 2009年 / 40卷 / 7-8期
关键词：
This article deals with five-axis machining of free-form surfaces with torus cutters and round inserts. An orientation of the tool axis to make a dynamic tool behaviour as stable as possible is presented in this work. With this new method an improvement of 50% on different roughness criteria can be obtained. For that; tool axis inclination will be towards the back of the tool compared to the feed direction that will allows to all inserts to machine simultaneously. The global cutting phenomenon is then continuous and it is thus possible to find a tool axis inclination that decreases its vibrations. It will be shown that this calculated tool axis inclination allows on the one hand to reduce the transversal tool deflections and in the other hand to stabilize the dynamic tool behaviour. A better quality on the finished workpiece is then obtained. © 2008 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：669 / 675
相关论文
共 50 条
  • [21] Cutting force model for a small-diameter helical milling cutter
    Li X.
    Yang M.
    Xie S.
    Yang S.
    Frontiers of Mechanical Engineering in China, 2007, 2 (3): : 272 - 277
  • [22] THE PREDICTION OF THE CUTTING FORCE IN BALL-END MILLING WITH A FLEXIBLE CUTTER
    SIM, C
    YANG, M
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1993, 33 (02): : 267 - 284
  • [23] Feedrate Optimization for Worn Cutter with Measured Cutting Force in Rough Milling
    Luo, Ming
    Hou, Yongfeng
    Zhang, Dinghua
    2016 IEEE INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2016, : 345 - 350
  • [24] A cutting force model for a waved-edge end milling cutter
    Zhang, Z
    Zheng, L
    Li, Z
    Liu, D
    Zhang, L
    Zhang, B
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 21 (06): : 403 - 410
  • [25] Precise Estimation of Cutting Force Coefficients and Cutter Runout in Milling using Differential Evolution Algorithm
    Chen, Ding
    Zhang, Xiaojian
    Xie, Yakun
    Ding, Han
    8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 283 - 286
  • [26] COMPUTER DESIGN OF A MINIMUM VIBRATION FACE MILLING CUTTER USING AN IMPROVED CUTTING FORCE MODEL
    DOOLAN, P
    PHADKE, MS
    WU, SM
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1976, 98 (03): : 807 - 810
  • [27] Assessing the Impact of Center of End Radius Milling Cutter on the Components of Cutting Force at Volume Milling
    Batuev, V. V.
    Batuev, V. A.
    INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017), 2017, 206 : 1105 - 1110
  • [28] Identification of Cutting Force Coefficients in Different Cutting Edges of Ball-End Milling Cutter
    Li B.-C.
    Wang Z.-Y.
    Zhang B.
    Wang W.-S.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2019, 40 (09): : 1316 - 1322
  • [29] Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory
    Mousseigne, M.
    Landon, Y.
    Seguy, S.
    Dessein, G.
    Redonnet, J. M.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 65 : 47 - 57
  • [30] Research on dynamic cutting performance of high speed face milling cutter
    Zheng, Minli
    Jiang, Bin
    Liu, Jia
    He, Chongyu
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 : 663 - 666
12345