A new control scheme for hydraulic rolling mill

被引：0

作者：

Li, Yong ^{[1
]}

Wang, Jun ^{[1
]}

Hu, Xian-Lei ^{[1
]}

Liu, Xiang-Hua ^{[1
]}

Wang, Guo-Dong ^{[1
]}

机构：

[1] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China

来源：

Kang T'ieh/Iron and Steel (Peking) | 2007年 / 42卷 / 06期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Aiming at the typical electro-hydraulic position servo system of hydraulic screw down of rolling mill, the merits and demerits of both PID control and repetitive control for the AGC compensation and roll eccentricity compensation are analyzed, then a novel multiple control scheme is presented, based on the PID control with inserted repetitive control. The structure of the new system and the method of important parameters tuning are described. The results show, that the structure of the proposed control scheme is simple; new control scheme can be easily designed and realized; dynamic and steady characteristics of the system are quite good; the novel system can realize the efficient and highly accurate compensation of AGC and roll eccentricity.

引用

页码：42 / 46

共 50 条

[31] NEW ROLL ECCENTRICITY CONTROL SYSTEM (MARECS) FOR ROLLING MILL.
Hashimoto, Kazuyoshi
Abe, Mitsuhiro
Hayama, Yasunobu
Hanaura, Toshitaka
Technical Review - Mitsubishi Heavy Industries, 1981, 18 (03): : 248 - 253
[32] Profile Control in the Rolling Mill.
Evans, R.K.
Baender Bleche Rohre, 1976, 17 (09): : 372 - 375
[33] Neural control of a steel rolling mill
Sbarbaro-Hofer, D., 1600, (13):
[34] Modelling and control of a hot rolling mill
Rossomando, F. G.
Denti Filho, J.
LATIN AMERICAN APPLIED RESEARCH, 2006, 36 (03) : 199 - 204
[35] Control scheme using forward slip for a multi-stand hot strip rolling mill
Moon, YH
Jo, IS
Van Tyne, CJ
KSME INTERNATIONAL JOURNAL, 2004, 18 (06): : 972 - 978
[36] HYDRAULIC SCREWDOWN CONTROL IN A MANDREL MILL
HAYASHI, C
YAMADA, T
UTAKOJI, M
NAKANISHI, R
IRON AND STEEL ENGINEER, 1985, 62 (03): : 95 - 95
[37] Control Scheme Using Forward Slip for a Multi-stand Hot Strip Rolling Mill
Young Hoon Moon
I Seok Jo
Chester J. Van Tyne
KSME International Journal, 2004, 18 : 972 - 978
[38] Robust dynamic output-feedback control of hydraulic servo system with input saturation for rolling mill
Li, J.-X. (jxli@ysu.edu.cn), 1600, Northeast University (28):
[39] Active disturbance rejection synchronous control for both sides of hydraulic servo position system of rolling mill
Wang, Zhe
Wang, Jing
Zhang, Yong-Jun
Li, Jing
Zhang, Fei
Zhao, Li
Kongzhi Lilun Yu Yingyong/Control Theory and Applications, 2013, 30 (12): : 1602 - 1608
[40] Stability and stabilization for the hydraulic automatic gauge control system of cold rolling mill with time delay and saturation
Qian, Cheng
Wang, Yibo
Hua, Changchun
Park, Kyoung-Su
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS, 2024, 361 (15):

← 1 2 3 4 5 →