A new control scheme for hydraulic rolling mill

被引：0

作者：

Li, Yong ^{[1
]}

Wang, Jun ^{[1
]}

Hu, Xian-Lei ^{[1
]}

Liu, Xiang-Hua ^{[1
]}

Wang, Guo-Dong ^{[1
]}

机构：

[1] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China

来源：

Kang T'ieh/Iron and Steel (Peking) | 2007年 / 42卷 / 06期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Aiming at the typical electro-hydraulic position servo system of hydraulic screw down of rolling mill, the merits and demerits of both PID control and repetitive control for the AGC compensation and roll eccentricity compensation are analyzed, then a novel multiple control scheme is presented, based on the PID control with inserted repetitive control. The structure of the new system and the method of important parameters tuning are described. The results show, that the structure of the proposed control scheme is simple; new control scheme can be easily designed and realized; dynamic and steady characteristics of the system are quite good; the novel system can realize the efficient and highly accurate compensation of AGC and roll eccentricity.

引用

页码：42 / 46

共 50 条

[21] NEW CONTROL TECHNOLOGY AND ITS APPLICATION FOR ROLLING-MILL
KATAYAMA, Y
NAKAJIMA, M
MOROOKA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1993, 79 (03): : 288 - 293
[22] New flatness control system in reverse cold rolling mill
Higashi, Kazuhiko
Itoh, Shigeharu
Sano, Toyokazu
Ibata, Haruhiro
KOBELCO Technology Review, 1991, (10): : 50 - 53
[23] New shape control system in reverse cold rolling mill
Higashi, Kazuhiko
Uozumi, Hideyuki
Itoh, Shigeharu
Sano, Toyokazu
Ibata, Haruhiro
R and D: Research and Development Kobe Steel Engineering Reports, 1990, 40 (02): : 81 - 84
[24] The rolling mill deviation analysis and improvement in Hydraulic pressure
Yuan, Kaishi
Chen, Longlong
Guan, Shengqi
MEASUREMENT TECHNOLOGY AND ENGINEERING RESEARCHES IN INDUSTRY, PTS 1-3, 2013, 333-335 : 2080 - +
[25] Adaptive Fuzzy Switching Control Based on Sliding Mode for Hydraulic Servo System of Rolling Mill
Miao Qing
Fang Yi-ming
Shao Peng-zeng
Deng Fei
PROCEEDINGS OF THE 31ST CHINESE CONTROL CONFERENCE, 2012, : 3171 - 3176
[26] Asymmetry of the roll gap as a factor improving work of the hydraulic gauge control in the plate rolling mill
Dyja, H
Markowski, J
Stoinski, D
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 60 (1-4) : 73 - 80
[27] Adaptive fuzzy backstepping control for hydraulic roll-gap system of a cold rolling mill
Wu, Zhong-Qiang
Tang, Ya-Chao
Xiao, Xue-Fei
Yu, Jin-Ping
Zhendong yu Chongji/Journal of Vibration and Shock, 2013, 32 (24): : 146 - 151
[28] Simulation of Automatic Position Control in an 8-high Cold Rolling Mill Hydraulic System
Wang, Lin
Cheng, Luoying
ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES, 2011, 145 : 193 - 197
[29] Robust Fault Diagnosis Based on Nonlinear Model of Hydraulic Gauge Control System on Rolling Mill
Dong, Min
Liu, Cai
Li, Guoyou
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2010, 18 (02) : 510 - 515
[30] Active Disturbance Rejection Control for Hydraulic Position Control System of High-quality Cold Rolling Mill
Xiang, Xiaofei
Wang, Zhe
Zhang, Fei
Zhao, Li
ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES II, 2012, 572 : 114 - +

← 1 2 3 4 5 →