A surface roughness prediction model using response surface methodology in micro-milling Inconel 718

被引：0

作者：

Lu X. ^{[1
]}

Wang F. ^{[1
]}

Wang X. ^{[1
]}

Lu Y. ^{[1
]}

Si L. ^{[1
]}

机构：

[1] Key Laboratory for Precision and Non-traditional Machining Technology, Ministry of Education, Dalian University of Technology, No. 2 LingGong Road, DaLian, LiaoNing Province

来源：

Lu, Xiaohong (lxhdlut@dlut.edu.cn) | 2017年 / Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland卷 / 19期

关键词：

Analysis of variance; ANOVA; Inconel; 718; Micro-milling; Response surface methodology; RSM; Surface roughness;

D O I：

10.1504/IJMMM.2017.084006

中图分类号：

学科分类号：

摘要：

In this paper, a surface roughness prediction model of micro-milling Inconel 718 by applying response surface methodology (RSM) is presented. The experiments based on centre composite rotatable design (CCRD) are designed to conduct the experiments. The cutting parameters considered are depth of cut, spindle speed and feed rate. Statistical methods, analysis of variance (ANOVA), are used to analyse the adequacy of the predictive model. The influence of each micro-milling parameter on surface roughness is analysed; also the magnitude order of parameters is determined. Depth of cut is found to be the critical influence factor. At last, the parameters interaction on surface roughness of micro-milling Inconel 718 is discussed by graphical means through MATLAB. © 2017 Inderscience Enterprises Ltd.

引用

页码：230 / 245

页数：15

共 50 条

[1] Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718
Lu, Xiaohong
Hu, Xiaochen
Jia, Zhenyuan
Liu, Mingyang
Gao, Song
Qu, Chenglin
Liang, Steven Y.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (5-8): : 2043 - 2056
[2] Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718
Xiaohong Lu
Xiaochen Hu
Zhenyuan Jia
Mingyang Liu
Song Gao
Chenglin Qu
Steven Y. Liang
The International Journal of Advanced Manufacturing Technology, 2018, 94 : 2043 - 2056
[3] Research on the prediction model of micro-milling surface roughness of Inconel718 based on SVM
Lu, Xiaohong
Hu, Xiaochen
Wang, Hua
Si, Likun
Liu, Yongyun
Gao, Lusi
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2016, 68 (02) : 206 - 211
[4] Experiment and prediction model for surface roughness in micro-milling
Shi W.
Liu Y.
Wang X.
Jiang F.
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2010, 41 (01): : 211 - 215
[5] Research on the prediction model of micro-milling surface roughness
Wang, Xinxin
Lu, Xiaohong
Jia, Zhenyuan
Jia, Xv
Li, Guangjun
Wu, Wenyi
Lu, X. (lxhdlut@dlut.edu.cn), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (09): : 5 - 6
[6] The effect of cutting parameters on micro-hardness and the prediction of Vickers hardness based on a response surface methodology for micro-milling Inconel 718
Lu, Xiaohong
Jia, Zhenyuan
Wang, Hua
Feng, Yixuan
Liang, Steven Y.
MEASUREMENT, 2019, 140 : 56 - 62
[7] The Effect of Machining Parameters to the Surface Roughness in Low Speed Machining Micro-milling Inconel 718
Kiswanto, Gandjar
Azmi, M.
Mandala, A.
Ko, T. J.
3RD INTERNATIONAL CONFERENCE ON MATERIALS AND INTELLIGENT MANUFACTURING (ICMIM), 2019, 654
[8] The flank wear prediction in micro-milling Inconel 718
Lu, Xiaohong
Wang, FuRui
Jia, Zhenyuan
Liang, Steven Y.
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (08) : 1374 - 1380
[9] Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of inconel 718
Lu, Xiaohong
Wang, FuRui
Xue, Liang
Feng, Yixuan
Liang, Steven Y.
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2019, 71 (06) : 787 - 794
[10] Prediction model of the surface roughness of micro-milling single crystal copper
Lu, Xiaohong
Xue, Liang
Ruan, Feixiang
Yang, Kun
Liang, Steven Y.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (11) : 5369 - 5374

← 1 2 3 4 5 →