Study of the formation and thermal stability of Mg2Co obtained by mechanical alloying and heat treatment

被引：0
|
作者：
机构：
[1] [1,Martínez, Carola
[2] Ordoñez, Stella
[3] Serafini, Daniel
[4] Guzmán, Danny
[5] Rojas, Paula
来源：
Martínez, C. (carola.martinezu@usach.cl) | 1600年 / Elsevier Ltd卷 / 590期
关键词：
The microstructural evolution of Mg and Co in a 2:1 atomic ratio was investigated during mechanical alloying and subsequent heat treatments. Microstructural characterization was determined using X-ray diffraction and scanning electron microscopy; while thermal stability was studied by means of differential scanning calorimetry. The results show that mechanical alloying produces amorphization and promotes greater microstructural refinement. Formation of Mg2Co requires an additional heat treatment at temperatures between 679 and 705 K; depending on milling time. Additionally; it was determined that the activation energy for Mg2Co crystallization decreases from 206 to 184 kJ/mol when the milling time increases from 12 to 36 h; respectively; Finally; a combination of the mechanical alloying process and heat treatment phase evolutions was proposed as an optimal processing route in order to obtain the Mg2Co compound. © 2013 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [41] Study on feasibility of Ti3AlC2 synthesis by mechanical alloying and heat treatment
    Zakeri, M.
    Rahimipour, M. R.
    Sadrnezhad, S. Kh.
    POWDER METALLURGY, 2011, 54 (03) : 273 - 277
  • [42] Crystalline Mg2Ni obtained from Mg-Ni amorphous precursor produced by mechanical alloying
    Ordoñez, S
    Rojas, P
    Bustos, O
    Martínez, V
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (10) : 717 - 720
  • [43] Formation and thermal stability of a nanoscale Ti-Fe-Ni powder produced by mechanical alloying
    Kim, Hyun-Goo
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2015, 66 (11) : 1750 - 1754
  • [44] Formation and thermal stability of a nanoscale Ti-Fe-Ni powder produced by mechanical alloying
    Hyun-Goo Kim
    Journal of the Korean Physical Society, 2015, 66 : 1750 - 1754
  • [45] Heat-treatment influence on Ni–Fe–Cu–Mo nanocrystalline alloy obtained by mechanical alloying
    Florin Popa
    Ionel Chicinaş
    Olivier Isnard
    Viorel Pop
    Journal of Thermal Analysis and Calorimetry, 2012, 110 : 295 - 299
  • [46] Structure and thermal stability of biodegradable Mg-Zn-Ca based amorphous alloys synthesized by mechanical alloying
    Datta, Moni Kanchan
    Chou, Da-Tren
    Hong, Daeho
    Saha, Partha
    Chung, Sung Jae
    Lee, Bouen
    Sirinterlikci, Arif
    Ramanathan, Madhumati
    Roy, Abhijit
    Kumta, Prashant N.
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2011, 176 (20): : 1637 - 1643
  • [47] Formation and environmental stability of nanocrystalline and amorphous hydrides in the 2Mg-Fe mixture processed by controlled reactive mechanical alloying (CRMA)
    Varin, RA
    Li, S
    Calka, A
    Wexler, D
    JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 373 (1-2) : 270 - 286
  • [48] Formation of nanocrystalline Mg2Si and Mg2Si dispersion strengthened Mg-Al alloy by mechanical alloying
    Natl Univ of Singapore, Singapore
    Nanostruct Mater, 4 (551-563):
  • [49] Formation of nanocrystalline Mg2Si and Mg2Si dispersion strengthened Mg-Al alloy by mechanical alloying
    Lu, L
    Lai, MO
    Hoe, ML
    NANOSTRUCTURED MATERIALS, 1998, 10 (04): : 551 - 563
  • [50] Formation of intermetallic nanocomposites in the Ti–Al–Si system by mechanical alloying and subsequent heat treatment
    K. W. Liu
    J. S. Zhang
    J. G. Wang
    G. L. Chen
    Journal of Materials Research, 1998, 13 : 1198 - 1203
12345