Study of the formation and thermal stability of Mg2Co obtained by mechanical alloying and heat treatment

被引：0
|
作者：
机构：
[1] [1,Martínez, Carola
[2] Ordoñez, Stella
[3] Serafini, Daniel
[4] Guzmán, Danny
[5] Rojas, Paula
来源：
Martínez, C. (carola.martinezu@usach.cl) | 1600年 / Elsevier Ltd卷 / 590期
关键词：
The microstructural evolution of Mg and Co in a 2:1 atomic ratio was investigated during mechanical alloying and subsequent heat treatments. Microstructural characterization was determined using X-ray diffraction and scanning electron microscopy; while thermal stability was studied by means of differential scanning calorimetry. The results show that mechanical alloying produces amorphization and promotes greater microstructural refinement. Formation of Mg2Co requires an additional heat treatment at temperatures between 679 and 705 K; depending on milling time. Additionally; it was determined that the activation energy for Mg2Co crystallization decreases from 206 to 184 kJ/mol when the milling time increases from 12 to 36 h; respectively; Finally; a combination of the mechanical alloying process and heat treatment phase evolutions was proposed as an optimal processing route in order to obtain the Mg2Co compound. © 2013 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [1] Study of the formation and thermal stability of Mg2Co obtained by mechanical alloying and heat treatment
    Martinez, Carola
    Ordonez, Stella
    Serafini, Daniel
    Guzman, Danny
    Rojas, Paula
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 590 : 469 - 473
  • [2] Characterization of hydrogen storage alloy Mg2CO synthesized by bulk mechanical alloying
    Wang, YJ
    Aizawa, T
    Nishimura, C
    Metastable, Mechanically Alloyed and Nanocrystalline Materials, 2005, 24-25 : 343 - 346
  • [3] Effect of substitution of Fe and Ni for Co in the synthesis of Mg2Co compound using the mechanical alloying method
    Bobet, JL
    Akiba, E
    Darriet, B
    JOURNAL OF ALLOYS AND COMPOUNDS, 2000, 297 (1-2) : 192 - 198
  • [4] Solid state synthesis of non-equilibrium Mg2Co via bulk mechanical alloying
    Aizawa, T
    Hasehira, K
    MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 : 989 - 994
  • [5] Preparation of Mg2Co alloy by mechanical alloying.: Effects of the synthesis conditions on the hydrogenation characteristics
    Bobet, JL
    Pechev, S
    Chevalier, B
    Darriet, B
    JOURNAL OF MATERIALS CHEMISTRY, 1999, 9 (01) : 315 - 318
  • [6] Solid-state synthesis of hydrogen storage Mg2Co alloys via bulk mechanical alloying
    Wang, Yijing
    Aizawa, Tatsuhiko
    Nishimura, Chikashi
    MATERIALS TRANSACTIONS, 2006, 47 (04) : 1052 - 1057
  • [7] Thermal stability of solid solutions obtained by mechanical alloying
    N. Z. Lyakhov
    T. F. Grigoryeva
    A. P. Barinova
    Journal of Thermal Analysis and Calorimetry, 2005, 82 : 741 - 746
  • [8] Thermal stability of solid solutions obtained by mechanical alloying
    Lyakhov, NZ
    Grigoryeva, TF
    Barinova, AP
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2005, 82 (03) : 741 - 746
  • [9] Crystalline Mg2Ni obtained by mechanical alloying
    Chen, J
    Dou, SX
    Liu, HK
    JOURNAL OF ALLOYS AND COMPOUNDS, 1996, 244 (1-2) : 184 - 189
  • [10] Metastable hexagonal Mg2Sn obtained by mechanical alloying
    Urretavizcaya, G
    Meyer, GO
    JOURNAL OF ALLOYS AND COMPOUNDS, 2002, 339 (1-2) : 211 - 215
12345