Physical and mechanical properties of Ti/Al multilayer heat releasing coatings

被引：0
|
作者：
Musil, Jindřich [1 ]
Stupka, Petr [1 ]
Zuzjaková, Šárka [1 ]
Čerstvý, Radomír [1 ]
机构：
[1] Department of Physics and New Technologies for Information Society (NTIS), European Centre of Excellence, University of West Bohemia, Univerzitní 8, Plzeň,CZ-306 14, Czech Republic
来源：
International Journal of Nanomanufacturing | 2015年 / 11卷 / 1-2期
关键词：
Multilayers - Aluminum coatings - Titanium alloys - Aluminum alloys - Binary alloys;
D O I：
10.1504/IJNM.2015.070525
中图分类号：
学科分类号：
摘要：
The paper reports on physical and mechanical properties of sputtered Ti/Al multilayer coatings with a bilayer thickness Λ ranging from 2 to 172 nm releasing heat during annealing. The temperature Thr at which the heat is released during reaction between Al and Ti atoms is investigated. It was found that: 1) Thr: a) decreases from ∼420 to 390°C for the coatings with Λ decreasing from 172 to 17 nm; b) ranges from ∼480 to ∼600°C for the coatings with Λ ≤ 12 nm; 2) the heat ΔHTi/Al evolved in the reaction increases from 5 to 35 kJ/mol with increasing Λ. Besides, it is shown that: 1) the heat can be released also during one pulse of the rapid thermal annealing up to 600°C with heating rate 100°C/s; 2) the released heat results in a strong interaction of the Ti/Al multilayer coating with Si substrate. The mechanical properties of the as-deposited Ti/Al multilayer coatings are also given. Copyright © 2015 Inderscience Enterprises Ltd.
引用
收藏
页码：78 / 93
相关论文
共 50 条
  • [21] Mechanical and tribological properties of Ti-Al-Ta-N/TiAl and Ti-Al-Ta-N/Ta multilayer coatings deposited by DC magnetron sputtering
    Shugurov, A. R.
    Kuzminov, E. D.
    SURFACE & COATINGS TECHNOLOGY, 2022, 441
  • [22] Examination of mechanical properties and failure mechanisms of TiN and Ti-TiN multilayer coatings
    Ma, K.J.
    Bloyce, A.
    Bell, T.
    Surface and Coatings Technology, 1995, 76-77 (1 -3 pt 1) : 297 - 302
  • [23] Examination of mechanical properties and failure mechanisms of TiN and Ti-TiN multilayer coatings
    Ma, KJ
    Bloyce, A
    Bell, T
    SURFACE & COATINGS TECHNOLOGY, 1995, 76 (1-3): : 297 - 302
  • [24] Microstructure, Mechanical, and Tribological Properties of Amorphous WB2/Ti Multilayer Coatings
    Li, Wenhe
    Gu, Wenshuang
    Chen, Yuqiu
    Gong, Jun
    Pei, Zhiliang
    Sun, Chao
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2023, 36 (08) : 1385 - 1396
  • [25] Microstructure, Mechanical, and Tribological Properties of Amorphous WB2/Ti Multilayer Coatings
    Wenhe Li
    Wenshuang Gu
    Yuqiu Chen
    Jun Gong
    Zhiliang Pei
    Chao Sun
    Acta Metallurgica Sinica (English Letters), 2023, 36 : 1385 - 1396
  • [26] Influence of titanium interlayer thickness distribution on mechanical properties of Ti/TiN multilayer coatings
    Jiang, C. L.
    Zhu, H. L.
    Shin, K. S.
    Tang, Y. B.
    THIN SOLID FILMS, 2017, 632 : 97 - 105
  • [27] Microstructure and mechanical properties of gradient Ti(C, N) and TiN/Ti(C, N) multilayer PVD coatings
    Chen, Li
    Wang, S. Q.
    Du, Yong
    Li, Jia
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 478 (1-2): : 336 - 339
  • [28] Effects of bilayer thickness and post-deposition annealing on the mechanical and structural properties of (Ti,Cr,Al)N/(Al,Si)N multilayer coatings
    Fukumoto, N.
    Ezura, H.
    Yamamoto, K.
    Hotta, A.
    Suzuki, T.
    SURFACE & COATINGS TECHNOLOGY, 2009, 203 (10-11): : 1343 - 1348
  • [29] Optimisation of mechanical properties of ZrC multilayer coatings
    Szparaga, Lukasz
    Bartosik, Przemyslaw
    Gilewicz, Adam
    Mydlowska, Katarzyna
    Ratajski, Jerzy
    THIN SOLID FILMS, 2020, 704 (704)
  • [30] Measurement of mechanical properties of multilayer coatings by nanoindentation
    Hancock, P
    da Silva, MFV
    Nicholls, JR
    MATERIALS SCIENCE AND TECHNOLOGY, 2002, 18 (08) : 827 - 830
12345