High-temperature oxidation resistance of Ti-45Al-8 (Nb, Hf, Y)-0.2B alloys

被引：0
|
作者：
Wang, Yanjing [1 ]
Li, Fei [1 ]
Gu, Yanpeng [1 ]
Wang, Jijie [1 ]
Du, Xinghao [1 ]
机构：
[1] Shenyang Aerospace University, Shenyang,110136, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2016年 / 45卷 / 01期
关键词：
Three kinds of alloys were designed by making the niobium equivalent of 8 at% approximately; and the compositions of the alloys were Ti-45Al-8Nb-0.2B; Ti-45Al-7Nb-0.1Hf-0.1Y-0.2B as well as Ti-45Al-4Nb-0.5Hf-0.1Y-0.2B (at%). The interrupted oxidation behaviors of alloys at 900℃ in static air were studied. The results show that combined addition of Hf and Y can enhance adherence between the oxide film and the substrate; Ti-45Al-4Nb-0.5Hf-0.1Y-0.2B alloy with the low Nb/Hf ratio has a lower oxidation gain and strong oxidation resistance. Ti-45Al-7Nb-0.1Hf-0.1Y-0.2B alloy with the high Nb/Hf ratio has a higher oxidation gain and poor oxidation resistance. Oxidized samples were examined by scanning electron microscopy (SEM); energy dispersive X-ray analysis (EDX) and X-ray diffraction analysis (XRD). It is found that combined addition of Hf and Y can promote the whisker growth of Al2O3 oxide scale; which improves adherence of the oxide film; a large number of continuous and compact Al2O3 oxide scale has been found in the alloys with low Nb/Hf ratio; which improves oxidation resistance of the alloy; external oxidation in the alloy with high Nb/Hf ratio results in higher oxidation gain and poor oxidation resistance. © 2016; Science Press. All right reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：132 / 136
相关论文
共 50 条
  • [41] HIGH-TEMPERATURE OXIDATION RESISTANCE OF CO-AL ALLOYS
    IRVING, GN
    STRINGER, J
    WHITTLE, DP
    OXIDATION OF METALS, 1975, 9 (05): : 427 - 440
  • [42] Investigation of Survived Solidification Features After Hot Isostatic Pressing in Third Generation γ-TiAl Alloys: Ti–45Al–(5, 10)Nb–0.2B–0.2C
    Nitish Bibhanshu
    Rashi Rajanna
    Amit Bhattacharjee
    Satyam Suwas
    Metallurgical and Materials Transactions A, 2024, 55 : 854 - 869
  • [43] Influence of the sintering atmosphere on the tensile properties of MIM-processed Ti 45Al 5Nb 0.2B 0.2C
    Limberg, W.
    Ebel, T.
    Pyczak, F.
    Oehring, M.
    Schimansky, F. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 323 - 329
  • [44] Effect of V/Nb on the Oxidation Resistance of Ti-45Al-9(V, Nb, Y) Alloy
    Chen Yuyong
    Yang Fei
    Kong Fantao
    Xiao Shulong
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (03) : 429 - 432
  • [45] Influence of laser shock peening on microstructure and high-temperature oxidation resistance of Ti45Al8Nb alloy fabricated via laser melting deposition
    Jiang, Lu-lu
    Lan, Liang
    Bai, Cheng-yan
    Xin, Ru-yi
    Gao, Shuang
    Wang, Hao-yu
    He, Bo
    Chen, Chao-yue
    Lu, Guo-xin
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2025, 35 (01) : 157 - 168
  • [46] B19 phase in Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y alloy
    Song, L.
    Xu, X. J.
    You, L.
    Liang, Y. F.
    Lin, J. P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 : 305 - 310
  • [47] High-temperature oxidation resistance of sputtered (Al,Cr,Nb,Ta,Ti,Si) N coatings
    Kretschmer, Andreas
    Mayrhofer, Paul Heinz
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [48] Oxidation resistance of powder metallurgy Ti–45Al–10Nb alloy at high temperature
    Xuchen Jin
    Peihao Ye
    Hongrui Ji
    Zhuanxia Suo
    Boxin Wei
    Xuewen Li
    Wenbin Fang
    InternationalJournalofMinerals,MetallurgyandMaterials, 2022, (12) : 2232 - 2240
  • [49] Oxidation resistance of powder metallurgy Ti—45Al—10Nb alloy at high temperature
    Xuchen Jin
    Peihao Ye
    Hongrui Ji
    Zhuanxia Suo
    Boxin Wei
    Xuewen Li
    Wenbin Fang
    International Journal of Minerals, Metallurgy and Materials, 2022, 29 : 2232 - 2240
  • [50] High-temperature oxidation behavior of Nb-Si-Cr alloys with Hf additions
    Vazquez, Alma
    Varma, S. K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (25) : 7027 - 7033
12345