Multi-response optimisation in ultrasonic machining of titanium using Taguchi's approach and utility concept

被引：16

作者：

Kumar J. ^{[1
]}

Khamba J.S. ^{[2
]}

机构：

[1] Department of Industrial Engineering and Management, National Institute of Technology, Kurukshetra, Haryana

[2] Department of Mechanical Engineering, University College of Engineering, Punjabi University, Patiala 147004, Punjab

来源：

International Journal of Manufacturing Research | 2010年 / 5卷 / 02期

关键词：

Design of experiments; Material removal rate; MRR; SR; Surface roughness; Taguchi method; Titanium; Tool wear rate; TWR; Ultrasonic machining; USM; Utility concept;

D O I：

10.1504/IJMR.2010.031629

中图分类号：

学科分类号：

摘要：

In this investigation, the effect of several parameters such as abrasive material, slurry grit size, tool material and ultrasonic power rating on the machining performance of Ultrasonic Machining (USM) has been evaluated using pure titanium (ASTM Grade-I) as work material. The machining characteristics that are being investigated are Material Removal Rate (MRR), Tool Wear Rate (TWR) and roughness of the machined surface. The study makes use of experimentation planned and executed as per Taguchi's robust design methodology. The results obtained have been analysed by using Analysis Of Variance (ANOVA) and relative significance of various factors has been evaluated. The information thus obtained has been used to construct a macro-model for USM of titanium. Multi-response optimisation was performed using Taguchi's method in conjunction with utility concept for simultaneous optimisation of the machining characteristics. Copyright © 2010 Inderscience Enterprises Ltd.

引用

页码：139 / 160

页数：21

共 50 条

[21] Using PCR-TOPSIS to optimise Taguchi's multi-response problem
Liao, HC
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 22 (9-10): : 649 - 655
[22] Using PCR-TOPSIS to optimise Taguchi's multi-response problem
Liao, Hung-Chang
1600, Springer-Verlag London Ltd (22): : 9 - 10
[23] An Effective Approach for Solving The Multi-Response Problem in Taguchi Method
Al-Refaie, Abbas
Wu, Tai-Hsi
Li, Ming-Hsien
JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2010, 4 (02): : 314 - 323
[24] Multi-response optimization of machining characteristics in ultrasonic machining of WC-Co composite through Taguchi method and grey-fuzzy logic
Singh, Ravi Pratap
Kataria, Ravinder
Kumar, Jatinder
Verma, Jagesvar
AIMS MATERIALS SCIENCE, 2018, 5 (01) : 75 - 92
[25] Multi-response optimization in wire electrical discharge machining (WEDM) of D2 steel using utility approach
Nayak, Ipsita
Rana, Jaydev
MANUFACTURING REVIEW, 2021, 8
[26] Multi-response optimization of low-pressure cold-sprayed coatings through Taguchi method and utility concept
Goyal, Tarun
Walia, R. S.
Sidhu, T. S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 64 (5-8): : 903 - 914
[27] Multi-response optimization of low-pressure cold-sprayed coatings through Taguchi method and utility concept
Tarun Goyal
R. S. Walia
T. S. Sidhu
The International Journal of Advanced Manufacturing Technology, 2013, 64 : 903 - 914
[28] Optimization of a multi-response problem in Taguchi's dynamic system
Hsieh, KL
Tong, LI
Chiu, HP
Yeh, HY
COMPUTERS & INDUSTRIAL ENGINEERING, 2005, 49 (04) : 556 - 571
[29] Measurement and Multi-response Optimization of Spark Erosion Machining Parameters for Titanium Alloy Using Hybrid Taguchi-Grey Relational Analysis-Principal Component Analysis Approach
Gopal, R.
Thirunavukkarasu, K.
Kavimani, V
Gopal, P. M.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (04) : 3129 - 3143
[30] Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi's DOE approach and utility concept
Chalisgaonkar R.
Kumar J.
Frontiers of Mechanical Engineering, 2013, 8 (2) : 201 - 214

← 1 2 3 4 5 →