Multi-response optimisation in ultrasonic machining of titanium using Taguchi's approach and utility concept

被引：16

作者：

Kumar J. ^{[1
]}

Khamba J.S. ^{[2
]}

机构：

[1] Department of Industrial Engineering and Management, National Institute of Technology, Kurukshetra, Haryana

[2] Department of Mechanical Engineering, University College of Engineering, Punjabi University, Patiala 147004, Punjab

来源：

International Journal of Manufacturing Research | 2010年 / 5卷 / 02期

关键词：

Design of experiments; Material removal rate; MRR; SR; Surface roughness; Taguchi method; Titanium; Tool wear rate; TWR; Ultrasonic machining; USM; Utility concept;

D O I：

10.1504/IJMR.2010.031629

中图分类号：

学科分类号：

摘要：

In this investigation, the effect of several parameters such as abrasive material, slurry grit size, tool material and ultrasonic power rating on the machining performance of Ultrasonic Machining (USM) has been evaluated using pure titanium (ASTM Grade-I) as work material. The machining characteristics that are being investigated are Material Removal Rate (MRR), Tool Wear Rate (TWR) and roughness of the machined surface. The study makes use of experimentation planned and executed as per Taguchi's robust design methodology. The results obtained have been analysed by using Analysis Of Variance (ANOVA) and relative significance of various factors has been evaluated. The information thus obtained has been used to construct a macro-model for USM of titanium. Multi-response optimisation was performed using Taguchi's method in conjunction with utility concept for simultaneous optimisation of the machining characteristics. Copyright © 2010 Inderscience Enterprises Ltd.

引用

页码：139 / 160

页数：21

共 50 条

[11] Modelling and Optimisation of Coconut Shell Drying and Carbonisation Using Multi-response Taguchi Method with Multi-response Signal-to-noise Procedure
Musabbikhah
Saptoadi, H.
Subarmono
Wibisono, M. Arif
INTERNATIONAL JOURNAL OF ENGINEERING, 2018, 31 (03): : 464 - 472
[12] Multi-response optimization of hybrid fibre engineered cementitious composite using Grey-Taguchi method and utility concept
Rawat, S.
Zhang, Y. X.
Lee, C. K.
CONSTRUCTION AND BUILDING MATERIALS, 2022, 319
[13] Single and Multi-response Optimization of Scroll Machining Parameters by the Taguchi Method
Dang, Xu
Al-Rahawi, Maged
Liu, Tao
Mohammed, Salah Taresh Abdo
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024, 25 (08) : 1601 - 1614
[14] Multi-Response Optimization of Process Parameters for Low-Pressure Cold Spray Coating Process Using Taguchi and Utility Concept
Tarun Goyal
T. S. Sidhu
R. S. Walia
Journal of Thermal Spray Technology, 2014, 23 : 114 - 122
[15] Multi-Response Optimization of Process Parameters for Low-Pressure Cold Spray Coating Process Using Taguchi and Utility Concept
Goyal, Tarun
Sidhu, T. S.
Walia, R. S.
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (1-2) : 114 - 122
[16] Measurement and Multi-response Optimization of Spark Erosion Machining Parameters for Titanium Alloy Using Hybrid Taguchi–Grey Relational Analysis–Principal Component Analysis Approach
R. Gopal
K. Thirunavukkarasu
V. Kavimani
P. M. Gopal
Journal of Materials Engineering and Performance, 2021, 30 : 3129 - 3143
[17] Novel Approach to Multi-Response Optimisation for Correlated Responses
Sibalija, Tatjana V.
Majstorovic, Vidosav D.
FME TRANSACTIONS, 2010, 38 (01): : 39 - 48
[18] Using PCR-TOPSIS to optimise Taguchi's multi-response problem
Hung-Chang Liao
The International Journal of Advanced Manufacturing Technology, 2003, 22 : 649 - 655
[19] Multi-response optimization in drilling using Taguchi's quality loss function
Gaitonde, V. N.
Karnik, S. R.
Achyutha, B. T.
Siddeswarappa, B.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2006, 13 (06) : 484 - 488
[20] Multi-response optimisation of machining parameters in wire EDM process using grey relational analysis
Padhi P.C.
Tripathy D.K.
International Journal of Manufacturing Technology and Management, 2020, 34 (04) : 311 - 330

← 1 2 3 4 5 →