Evaluation of static and fatigue strength characteristics for thermal sprayed WC-Co materials by indentation method

被引：0

作者：

Nakanishi K. ^{[1
]}

Sakaue K. ^{[1
]}

Ogawa T. ^{[1
]}

Kobayashi Y. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Aoyama Gakuin University, Chuou-ku, Sagamihara-shi, Kanagawa, 252-5258

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2010年 / 76卷 / 767期

关键词：

Anisotropy; Brittle fracture; Coating material; Fatigue; HVOF; Indentation;

D O I：

10.1299/kikaia.76.902

中图分类号：

学科分类号：

摘要：

Static and cyclic indentation tests were performed on the surface and the cross-section of thermal sprayed WC-Co materials. Micro indentation tests revealed that the mechanical properties on the surface are different from those on the cross-section. Also, the static strength on the surface is lower than that on the cross section. Under the static indentation tests, the cracks on the surface formed a ring crack around the impression. On the other hand, the crack on the cross-section grew in the direction perpendicular to the sprayed direction. The results of cyclic indentation tests showed that the cyclic number for the crack initiation decreased with increasing the maximum surface stress. The fatigue strength on the cross section was slightly higher than on the surface. These results mean that thermal-sprayed WC materials clearly have cyclic fatigue behavior and remarkable anisotropy.

引用

页码：902 / 907

页数：5

共 50 条

[21] Compressive fatigue characteristics of Wc-Co based alloys
Yamamoto, T
Sakagami, K
PROGRESS OF MACHINING TECHNOLOGY, 2004, : 144 - 149
[22] Influence of cobalt content on the fatigue strength of WC-Co hardmetals
Nakajima, Takeshi
Hosokawa, Hiroyuki
Shimojima, Koji
PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 1201 - +
[23] Thermal processes in HVOF sprayed WC-Co coating on a copper substrate
Sobolev, VV
Guilemany, JM
Calero, JA
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1998, 7 (02) : 191 - 192
[24] Fatigue and deformation of HVOF sprayed WC-Co coatings and hard chrome plating
Ibrahim, A.
Berndt, C. C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 456 (1-2): : 114 - 119
[25] Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings
Lima, RS
Karthikeyan, J
Kay, CM
Lindemann, J
Berndt, CC
THIN SOLID FILMS, 2002, 416 (1-2) : 129 - 135
[26] Microstructural Evaluation of Suspension Thermally Sprayed WC-Co Nanocomposite Coatings
Ahmed, R.
Faisal, N. H.
Ali, O.
Al-Anazi, Nayef M.
Al-Mutairi, S.
Mamour, S.
Polychroniadis, E. K.
Goosen, M. F. A.
2ND INTERNATIONAL MULTIDISCIPLINARY MICROSCOPY AND MICROANALYSIS CONGRESS, 2015, 164 : 31 - 38
[27] Evaluation of HVOF-sprayed WC-Co coatings for wood machining
Chivavibul, Pornthep
Watanabe, Makoto
Kuroda, Seiji
Komatsu, M.
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (21): : 5127 - 5135
[28] Mechanical evaluation of WC-Co materials with varying microstructures
Pittari, John J., III
Swab, Jeffrey J.
Wright, Jared
Atwater, Katherine
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 104
[29] Thermal processes in HVOF sprayed WC-Co coating on a copper substrateWork in progress
V. V. Sobolev
J. M. Guilemany
J. A. Calero
Journal of Thermal Spray Technology, 1998, 7 : 191 - 192
[30] Sliding and abrasive wear resistance of thermal-sprayed WC-CO coatings
Qiao, YF
Liu, YR
Fischer, TE
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2001, 10 (01) : 118 - 125

← 1 2 3 4 5 →