Fabrication of tic-reinforced surface layers on ductile cast iron substrate by laser surface alloying

被引：3
|
作者：
Janicki D. [1 ]
机构：
[1] Silesian University of Technology, Faculty of Mechanical Engineering, Welding Department, Konarskiego Street 18A, Gliwice
来源：
Solid State Phenomena | 2020年 / 308卷
关键词：
Computational thermodynamics; Ductile cast iron; In-situ composite; Laser surface alloying; Titanium carbide;
D O I：
10.4028/www.scientific.net/SSP.308.76
中图分类号：
学科分类号：
摘要：
This chapter presents a novel method for analysis and optimization of the in-situ formation of TiC-reinforced composite surface layers (TRL) on a ductile cast iron substrate during the laser surface alloying process, combining the experimental approach with the computational thermodynamics. The microstructure of the TRLs has been assessed by light optical microscopy, scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction. The results of thermodynamic calculations with the Scheil-Gulliver model showed a good agreement with the experimental results, indicating that the actual solidification path for the analyzed Fe-C-Si-Ti alloy systems under the investigated range of laser processing conditions is close to the Scheil-Gulliver assumption. © 2020 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：76 / 99
页数：23
相关论文
共 50 条
  • [21] Fatigue crack propagation in laser alloyed ductile cast iron surface
    Li, Zheng-yang
    Zhao, Hai-yan
    Gu, Yu
    Zhong, Min-lin
    Zhang, Bin
    Zhang, Hong-jun
    Liu, Wen-jin
    Ren, Zhi-yuan
    Yang, Ming-jiang
    Lin, Hua-qiang
    JOURNAL OF LASER APPLICATIONS, 2013, 25 (01)
  • [22] Roughness of the surface layers of plasma oxidation-treated ductile cast iron
    Jeong, BY
    Hwang, MS
    Lee, C
    Kim, MH
    SURFACE & COATINGS TECHNOLOGY, 2001, 135 (2-3): : 279 - 285
  • [23] Solid Particle Erosion of Laser Surface Melted Ductile Cast Iron
    Kotarska, A.
    Janicki, D.
    Gorka, J.
    Poloczek, T.
    ARCHIVES OF FOUNDRY ENGINEERING, 2020, 20 (03) : 105 - 111
  • [24] LASER ALLOYING ON CHROMIUM-COATED SURFACE OF NODULAR CAST IRON
    Wei Lumei and Deng Liyan Department of Mechanical Engineering
    Transactions of Nonferrous Metals Society of China, 1998, (03) : 141 - 144
  • [25] Laser alloying on chromium-coated surface of nodular cast iron
    Wei, LM
    Deng, LY
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1998, 8 (03) : 496 - 499
  • [26] IN-SITU SYNTHESIS OF TITANIUM CARBIDE PARTICLES IN AN IRON MATRIX DURING DIODE-LASER SURFACE ALLOYING OF DUCTILE CAST IRON
    Janicki, Damian
    MATERIALI IN TEHNOLOGIJE, 2017, 51 (02): : 317 - 321
  • [27] Investigation of laser surface alloying of copper on high nickel austenitic ductile iron
    Zeng, DW
    Xie, CS
    Yung, KC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 333 (1-2): : 223 - 231
  • [28] Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying
    Jiang, P. F.
    Zhang, C. H.
    Zhang, S.
    Zhang, J. B.
    Chen, J.
    Liu, Y.
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 255 (255)
  • [29] Laser ultrasonic alloying of cast iron surface with titanium of materials with required properties
    Gureev, D.M.
    Mednikov, S.I.
    Yamshchikov, S.V.
    Balashov, I.A.
    Fizika i Khimiya Obrabotki Materialov, 1993, (03): : 109 - 116
  • [30] Investigation of corrosion behavior of high nickel ductile iron by laser surface alloying with copper
    Zenc, DW
    Yung, KC
    Xie, CS
    SCRIPTA MATERIALIA, 2001, 44 (12) : 2747 - 2752
12345