Properties of concrete integrated with recycled concrete sand

被引:0
|
作者
Singh, Manoj K. [1 ]
Sengupta, J.B. [2 ]
Kumar, Binod [3 ]
机构
[1] Jamia Millia Islamia University, New Delhi, India
[2] Applied and Engineering Chemistry, Govt Engineering College, Jabalpur, Madhya, India
[3] Rigid Pavement Division, CSIR-Central Road Research Institute, New Delhi, India
来源
Indian Concrete Journal | 2018年 / 92卷 / 09期
关键词
Recycling - Shrinkage - Concrete mixers - Compressive strength - Concrete aggregates - Concrete mixtures;
D O I
暂无
中图分类号
学科分类号
摘要
this paper investigates the effects of replacement of recycled concrete sand (rcS) with fine aggregates, on the fresh and hardened properties of concrete. the property of rcS mixed concrete was studied and compared with control concrete of 40 MPa compressive strength. the properties of rcS concrete differs from control concrete prepared with natural sand, because of presence of attached mortar, old cement paste and more fines. the results indicate that the rcS concrete shows comparable workability in comparison to r0 concrete. the mechanical properties (compressive, flexure, split tensile and modulus of elasticity) of concrete made with rcS was lower in compression to control concrete but acceptable upto 60% rcS in mix. the drying shrinkage strain of 100% rcS mixed concrete at 28 days was observed twice in compression to controlled concrete and it showed more abrasion value in that comparison and also concrete made with 100% rcS showed 41% and 11.3% lower in sorption value at early and later age stage respectively in that comparison. © 2018 Associated Cement Companies Ltd. All rights reserved.
引用
收藏
页码:36 / 44
相关论文
共 50 条
  • [31] Hardened properties of layered 3D printed concrete with recycled sand
    Ding, Tao
    Xiao, Jianzhuang
    Zou, Shuai
    Wang, Yu
    CEMENT & CONCRETE COMPOSITES, 2020, 113
  • [32] Proportioning, microstructure and fresh properties of self-compacting concrete with recycled sand
    Carro-Lopez, Diego
    Gonzalez-Fonteboa, Belen
    Martinez-Abella, Fernando
    Gonzalez-Taboada, Iris
    de Brito, Jorge
    Varela-Puga, Fernando
    3RD INTERNATIONAL CONFERENCE ON SUSTAINABLE CIVIL ENGINEERING STRUCTURES AND CONSTRUCTION MATERIALS - SUSTAINABLE STRUCTURES FOR FUTURE GENERATIONS, 2017, 171 : 645 - 657
  • [33] Experimental analysis on mechanical properties of sea sand geopolymer recycled aggregate concrete
    Chen, Yuliang
    Zhang, Zihong
    Liu, Zhihua
    Ye, Peihuan
    Construction and Building Materials, 2024, 457
  • [34] Parent Concrete Quality of Recycled Concrete Aggregates on Some Engineering Properties of Concrete
    Benmiloud, Houssam Eddine
    Adjoudj, M'hamed
    Ezziane, Karim
    Kadri, El Hadj
    JOURNAL OF MATERIALS AND ENGINEERING STRUCTURES, 2022, 9 (03): : 299 - 315
  • [35] Performance of recycled waste glass sand as partial replacement of sand in concrete
    Tamanna, Nafisa
    Tuladhar, Rabin
    Sivakugan, Nagaratnam
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 239
  • [36] Impact of recycled sand and gravels in concrete on volume change
    Delsaute, Brice
    Staquet, Stephanie
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 232
  • [37] Feasibility of Utilizing Fine Recycled Concrete Aggregates as a Dune Sand Replacement in Concrete Production
    Gamieldien, Areej
    Dookee, Bhooshay
    Beushausen, Hans
    Alexander, Mark
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON CONCRETE REPAIR, REHABILITATION AND RETROFITTING, ICCRRR 2024, 2025, 59 : 630 - 639
  • [38] Effect of steel fibers on the performance of concrete made with recycled concrete aggregates and dune sand
    Kachouh, Nancy
    El-Hassan, Hilal
    EI-Maaddawy, Tamer
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 213 : 348 - 359
  • [39] Physical and mechanical properties of foamed concrete with recycled concrete aggregates
    Han, Shangyu
    Zhang, Peiheng
    Zhang, Huihua
    Kang, Dengyuan
    Wang, Xianrong
    FRONTIERS IN MATERIALS, 2023, 10
  • [40] Mechanical Properties of Rubberized Concrete Containing Recycled Concrete Aggregate
    Tamanna, K.
    Tiznobaik, M.
    Banthia, N.
    Alam, M. Shahria
    ACI MATERIALS JOURNAL, 2020, 117 (03) : 169 - 180