Preparation of PZT(95/5) antiferroelectric nanoscale powders using sol-gel method

被引：0
|
作者：
Yao, Hai-Yun [1 ]
Hu, Yan-Hua [1 ]
Yu, Zhan-Jun [1 ]
Wang, Li-Xia [2 ]
机构：
[1] Department of Materials, Inner Mongolia University of Technology, Hohhot, China
[2] Technology Department of Fucheng Forging Company, Inner Mongolia First Machinery Manufacturing, Baotou, China
来源：
Gongneng Cailiao/Journal of Functional Materials | 2014年 / 45卷
关键词：
Sol-gel process - Differential thermal analysis - Powders - Nanotechnology - Perovskite;
D O I：
10.3969/j.issn.1001-9731.2014.Suppl.(2).030
中图分类号：
学科分类号：
摘要：
PZT(95/5) antiferroelectric nanoscale powders were prepared by sol-gel process. 550-750, calcination temperature range of dried PZT(95/5) powder were identified by differential thermal analysis. Dried powders were calcinated at 550, 600, 650, 750, holding for 2 hours, respectively. XRD analysis showed that the strength of the main crystalline phase gradually increases, the impurity phase peak height decreases with the increasing of the calcination temperature. When calcinated at 750, single perovskite phase was formed and PZT95/5 powders size was about 100 nm. ©, 2014, Journal of Functional Materials. All right reserved.
引用
收藏
页码：140 / 143
相关论文
共 50 条
  • [21] Preparation of semiconductor ZnO powders by sol-gel method: Humidity sensors
    Ates, T.
    Tatar, C.
    Yakuphanoglu, F.
    SENSORS AND ACTUATORS A-PHYSICAL, 2013, 190 : 153 - 160
  • [22] Preparation and characterization of BiFeO3 powders by sol-gel method
    Wang, Da-Wei, 1600, Beijing Institute of Aeronautical Materials (BIAM)
  • [23] Preparation of nanometer magnesium aluminate spinel powders by sol-gel method
    Liu, Wei
    Wu, Denghui
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2010, 37 (3-4): : 297 - 304
  • [24] Preparation of PZT thin films for low voltage application by sol-gel method
    Soyama, N
    Maki, K
    Mori, S
    Ogi, K
    PROCEEDINGS OF THE 2001 12TH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS, VOLS I AND II, 2001, : 611 - 614
  • [25] Preparation of PZT Material with Different Zi/Ti Ratio by Sol-Gel Method
    Chen, Xi
    INNOVATION IN CIVIL ENGINEERING, ARCHITECTURE AND SUSTAINABLE INFRASTRUCTURE, 2012, 238 : 105 - 108
  • [26] Preparation of PZT thin films on Hastelloy substrate using sol-gel processing
    Yu, W
    Chin, BA
    Chen, Z
    SOL-GEL SYNTHESIS AND PROCESSING, 1998, 95 : 111 - 117
  • [27] Fabrication of nanometer powders by the sol-gel method
    Yao, MQ
    Wei, YH
    Hu, LQ
    Xu, BS
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 (05) : 325 - 329
  • [28] Fabrication of Nanometer Powders by the Sol-Gel Method
    Yao, Minqi
    Wei, Yinghui
    Hu, Lanqing
    Xu, Bingshe
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2002, 31 (05): : 328 - 329
  • [29] PROCESSING EFFECTS IN THE SOL-GEL PREPARATION OF PZT DRIED GELS, POWDERS, AND FERROELECTRIC THIN-LAYERS
    LAKEMAN, CDE
    PAYNE, DA
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1992, 75 (11) : 3091 - 3096
  • [30] Al2TiO5 preparation starting with reactive powders obtained by sol-gel method
    Zaharescu, M
    Crisan, M
    Crisan, D
    Dragan, N
    Jitianu, A
    Preda, M
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (09) : 1257 - 1264
12345