Finite element analysis and improved design for taper trapezium joint threads of high-strength drilling rod with big hole

被引：0
|
作者：
Zhang, You-Zhen [1 ]
Shi, Zhi-Jun [1 ]
Tian, Dong-Zhuang [1 ]
Gong, Cheng [1 ]
Peng, La-Mei [1 ]
机构：
[1] Xi'an Branch, China Coal Research Institute, Xi'an 710077, China
来源：
Meitan Xuebao/Journal of the China Coal Society | 2010年 / 35卷 / 07期
关键词：
Directional drilling - Horizontal drilling;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Firstly, the parameter of joint thread was studied considering the load of drilling rod. Then the 3D model of the joint thread was built and its equivalent stress and contact stress under several working conditions were obtained through finite element method. Based on the analysis, an improved design of dual taper and cylinder seal were subsequently presented. The research results show that the stress concentration and sealing capability of joint are improved, and some filed experiments are given to demonstrate the improved design.
引用
收藏
页码：1219 / 1223
相关论文
共 50 条
  • [41] 6A13-T6 high-strength aluminium alloy columns under axial compression: Experiments, finite element analysis and design recommendations
    Zhong, Chang-jun
    Feng, Ruo-qiang
    Huang, Yong-qi
    Li, Hu-yang
    STRUCTURES, 2023, 55 : 71 - 84
  • [42] Finite Element Analysis of the Mechanical Properties of Axially Compressed Square High-Strength Concrete-Filled Steel Tube Stub Columns Based on a Constitutive Model for High-Strength Materials
    Li, Biao
    Ding, Faxing
    Lu, Deren
    Lyu, Fei
    Huang, Shijian
    Cao, Zheya
    Wang, Haibo
    MATERIALS, 2022, 15 (12)
  • [43] Prediction of the fatigue curve of high-strength steel resistance spot welding joints by finite element analysis and machine learning
    Zhengxiao Yu
    Ninshu Ma
    Hidekazu Murakawa
    Goro Watanabe
    Mingyao Liu
    Yunwu Ma
    The International Journal of Advanced Manufacturing Technology, 2023, 128 : 2763 - 2779
  • [44] Flexural Investigation of a/d Ratio for High-Strength PVA-FRC Beams Based on Experimental and Finite Element Analysis
    Ayub, Tehmina
    Khan, Sadaqat Ullah
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2022, 46 (01) : 717 - 732
  • [45] Flexural Investigation of a/d Ratio for High-Strength PVA-FRC Beams Based on Experimental and Finite Element Analysis
    Tehmina Ayub
    Sadaqat Ullah Khan
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2022, 46 : 717 - 732
  • [46] Finite Element and Theoretical Analysis of High-Strength Steel-Strand Mesh Reinforced ECCs Under Flexural Load
    Cao, Lei
    Li, Ziyuan
    Li, Yuxuan
    Li, Ke
    Jing, Denghu
    Qi, Ya
    Geng, Yaohui
    MATERIALS, 2024, 17 (23)
  • [47] Prediction of the fatigue curve of high-strength steel resistance spot welding joints by finite element analysis and machine learning
    Yu, Zhengxiao
    Ma, Ninshu
    Murakawa, Hidekazu
    Watanabe, Goro
    Liu, Mingyao
    Ma, Yunwu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (5-6): : 2763 - 2779
  • [48] Radial-shear rolling of high-strength aluminum alloys: Finite element simulation and analysis of microstructure and mechanical properties
    Akopyan, T. K.
    Gamin, Y., V
    Galkin, S. P.
    Prosviryakov, A. S.
    Aleshchenko, A. S.
    Noshin, M. A.
    Koshmin, A. N.
    Fomin, A., V
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 786
  • [49] Finite-Element Analysis of High-Strength Steel Extended End-Plate Connections under Cyclic Loading
    Lin, Tao
    Wang, Zhan
    Hu, Fangxin
    Wang, Peng
    MATERIALS, 2022, 15 (08)
  • [50] Finite Element Analysis on Shear Behavior of High-Strength Bolted Connectors under Inverse Push-Off Loading
    Wang, Wei
    Zhang, Xie-dong
    Ding, Fa-xing
    Zhou, Xi-long
    ENERGIES, 2021, 14 (02)
12345