Finite element analysis and improved design for taper trapezium joint threads of high-strength drilling rod with big hole

被引：0

作者：

Zhang, You-Zhen ^{[1
]}

Shi, Zhi-Jun ^{[1
]}

Tian, Dong-Zhuang ^{[1
]}

Gong, Cheng ^{[1
]}

Peng, La-Mei ^{[1
]}

机构：

[1] Xi'an Branch, China Coal Research Institute, Xi'an 710077, China

来源：

Meitan Xuebao/Journal of the China Coal Society | 2010年 / 35卷 / 07期

关键词：

Directional drilling - Horizontal drilling;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Firstly, the parameter of joint thread was studied considering the load of drilling rod. Then the 3D model of the joint thread was built and its equivalent stress and contact stress under several working conditions were obtained through finite element method. Based on the analysis, an improved design of dual taper and cylinder seal were subsequently presented. The research results show that the stress concentration and sealing capability of joint are improved, and some filed experiments are given to demonstrate the improved design.

引用

页码：1219 / 1223

共 50 条

[31] Finite element analysis of the end cutting process for U-section parts with high-strength steel
SHI Lei1
Baosteel Technical Research, 2012, 6 (01) : 32 - 36
[32] Failure Analysis of Damaged High-Strength Bolts under Seismic Action Based on Finite Element Method
Liu, Yang
Fan, Linlin
Wang, Wentao
Gao, Yaobin
He, Jintao
BUILDINGS, 2023, 13 (03)
[33] Uncertainties in Finite Element Analysis of Yield Point Phenomena in Advanced High-Strength Steel Spot Welds
Rezayat, H.
Ghassemi-Armaki, H.
Bhat, S. P.
Sriram, S.
Babu, S. S.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (02) : 1272 - 1281
[34] Finite element analysis and proposed design rules for 304D high-strength stainless steel I-shaped members in shear
Chen, Boshan
Wang, Yuanqing
Xu, Dongdong
Yuan, Huanxin
Yan, Libo
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2023, 204
[35] Reduction of Residual Stress for High-Strength Low-Alloy Steel Strip Based on Finite Element Analysis
Qiu, Zengshuai
He, Anrui
Shao, Jian
Xia, Xiaoming
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
[36] Finite element analysis of shear behavior of reinforced concrete beam strengthened by high-strength steel wire mesh
Yang, Chenxing
Liu, Zheng
Sun, Liping
Li, Jiong
STRUCTURAL ENGINEERING, VIBRATION AND AEROSPACE ENGINEERING, 2014, 482 : 15 - +
[37] Probabilistic Design for Strength Analysis of Tie Rod Subjected to Tensile, Compressive, and Shear Load by Using Finite Element Methods
Godase, Abaso J.
Kulkarni, Prasad P.
Katekar, Sameer D.
TECHNO-SOCIETAL 2018: PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES FOR SOCIETAL APPLICATIONS - VOL 2, 2020, : 109 - 119
[38] Finite element analysis of capacity of high strength steel-reinforced concrete frame side joint
College of Civil Engineering, Shenyang University Civil and Architecture, Shenyang 110168, China
不详
Liaoning Gongcheng Jishu Daxue Xuebao (Ziran Kexue Ban), 2006, 3 (372-374):
[39] Finite-element thermal analysis of laser welding of galvanized high-strength steel in a zero-gap lap joint configuration and its experimental verification
Ma, Junjie
Kong, Fanrong
Kovacevic, Radovan
MATERIALS & DESIGN, 2012, 36 : 348 - 358
[40] Testing, finite element analysis and design of high strength steel RHS T-joints
Lan, Xiaoyi
Chan, Tak-Ming
Young, Ben
ENGINEERING STRUCTURES, 2021, 227

← 1 2 3 4 5 →