Electron Backscatter Diffraction (EBSD) analysis of laser-cladded AISI 420 martensitic stainless steel

被引：0
|
作者：
Alam, Mohammad K. [1 ]
Mehdi, Mehdi [1 ]
Urbanic, Ruth Jill [1 ]
Edrisy, Afsaneh [1 ]
机构：
[1] Department of Mechanical, Automotive and Materials Engineering, University of Windsor, 401 Sunset Ave., Windsor,Ontario,N9B 3P4, Canada
来源：
Materials Characterization | 2020年 / 161卷
关键词：
Laser cladding is a laser-based additive manufacturing (AM) process that is currently being used to coat part of a substrate or to produce a three-dimensional object in layer by layer following a computer-controlled instruction. In this study; laser-cladded AISI 420 martensitic stainless steel was characterized using the Electron Backscatter Diffraction (EBSD) technique to analyze the substructure of martensite in the selected zones such as the bead zone (BZ); the dilution zone (DZ); and the interface with the heat affected zone (HAZ) of the bead. The EBSD prior austenite grain (PAG) maps and inverse pole figure (IPF) revealed planer and columnar grains at the interface and within the adjacent dilution zone; while equiaxed and a combination of both columnar and equiaxed grains were observed in the center of the bead and dilution zone. The Grain Orientation Spread (GOS) and grain average Image Quality (IQ) techniques were used to quantify the grain misorientation and residual strain/stress in those selected zones. The EBSD analysis with the GOS and IQ values confirmed deformation and strain in the crystal lattice structure of those respective zones. The GOS approach revealed that most of the grains at the BZ and HAZ were highly strained and 26–59% fraction of the grains was at a high angle of GOS (3°–5°) indicating the availability of highly deformed grains in both regions. The IQ value was compared and correlated with the experimental values of residual stresses (RS) measured by XRD methods to understand residual strain distribution in those zones. It was revealed that the IQ value is inversely proportional to the RS value found in an earlier study. This EBSD parameter is expected to be used as an alternative method of analyzing RS distribution in the laser-cladded coating. © 2020 Elsevier Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [21] Ionic nitriding in cathodic cage of AISI 420 martensitic stainless steel
    de Sousa, R. R. M.
    de Araujo, F. O.
    Ribeiro, K. J. B.
    Dumelow, T.
    da Costa, J. A. P.
    Alves, C., Jr.
    SURFACE ENGINEERING, 2008, 24 (01) : 52 - 56
  • [22] The effect of shielding gas on weldability of the AISI 420 martensitic stainless steel
    Acar, I.
    Cevik, B.
    Gulenc, B.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2023, 60 (02): : 108 - 128
  • [23] Corrosion behaviour of dissimilar TIG welded austenitic stainless steel AISI 304 and martensitic stainless steel AISI 420
    Ghosh, Abhishek
    Pal, Pradip Kumar
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020, 27 (03) : 665 - 669
  • [24] Effect of molybdenum content on the microstructural characteristic of surface cladded CoCrFeNi high entropy on AISI420 martensitic stainless steel
    Askari, Marzieh
    Khorrami, Mahmoud Sarkari
    Sohi, Mahmoud Heydarzadeh
    MATERIALS TODAY COMMUNICATIONS, 2025, 43
  • [25] Investigation of mechanical, microstructural, and machining properties of AISI 420 martensitic stainless steel welded by laser welding
    Erdem, Mehmet
    Altug, Mehmet
    Karabulut, Mustafa
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (1-4): : 481 - 492
  • [26] The effect of preheat & post weld heat treatment on the laser weldability of AISI 420 martensitic stainless steel
    Kose, Ceyhun
    Kacar, Ramazan
    MATERIALS & DESIGN, 2014, 64 : 221 - 226
  • [27] Investigation of mechanical, microstructural, and machining properties of AISI 420 martensitic stainless steel welded by laser welding
    Mehmet Erdem
    Mehmet Altuğ
    Mustafa Karabulut
    The International Journal of Advanced Manufacturing Technology, 2016, 85 : 481 - 492
  • [28] Nitrogen ion implantation on the mechanical properties of AISI 420 martensitic stainless steel
    Zhang, Jingfeng
    Peng, Shixiang
    Zhang, Ailin
    Wen, Jiamei
    Zhang, Tao
    Xu, Yuan
    Yan, Sha
    Ren, Haitao
    SURFACE & COATINGS TECHNOLOGY, 2016, 305 : 132 - 138
  • [29] Martensitic stainless steel AISI 420—mechanical properties, creep and fracture toughness
    J. Brnic
    G. Turkalj
    M. Canadija
    D. Lanc
    S. Krscanski
    Mechanics of Time-Dependent Materials, 2011, 15 : 341 - 352
  • [30] Influence of Cryogenic Treatments on the Wear Behavior of AISI 420 Martensitic Stainless Steel
    Prieto, G.
    Tuckart, W. R.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (11) : 5262 - 5271
12345