Experimental study on green electrical discharge machining in tap water of Ti-6Al-4V and parameters optimization

被引：0
|
作者：
机构：
[1] Tang, L.
[2] Du, Y.T.
来源：
Tang, L. (tang_lin168@yahoo.com) | 1600年 / Springer London卷 / 70期
关键词：
Ti-6Al-4V is widely used in the aerospace; automobile; and biomedical fields; but is a difficult-to-machine material. Electrical discharge machining (EDM) is regarded as one of the most effective approaches tomachining Ti-6Al-4V alloy; since it is a non-contact electro-thermal machining method; and it is independent from the mechanical properties of the processed material. This paper aims to combine grey relational analysis and Taguchi methods to solve the problem of EDM parameters optimization. From the viewpoint of health and environment; tap water as working fluid has good working environment; since it does not release harmful gas. The process parameters include discharge current; gap voltage; lifting height; negative polarity and pulse duty factor. The electrode wear ratio (EWR); material removal rate (MRR) and surface roughness (SR) as objective parameters are chosen to evaluate the whole machining effects. Experiments were carried out based on Taguchi L9 orthogonal array and grey relational analysis; and then verified the results through a confirmation experiment. Compared the machining parameters A1B1C 3D2 with A1B2C2D 2; MRR increased from 1.28 mm3/min to 2.38 mm3/min; EWR decreased from 0.14 to 0.10 mm3/min and SR decreased from Ra 2.37 μm to Ra 1.93 μm. The process parameters sequenced in order of relative importance are: the ratio of pulse width to pulse interval; discharge current; lifting height and gap voltage. The results showed that using tap water machining Ti-6Al-4V material can obtain high MRR; decrease the machining cost and have no harmful to the operators and the environment. © Springer-Verlag London 2013;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1 / 4
相关论文
共 50 条
  • [21] EXPERIMENTAL INVESTIGATION ON ELECTRICAL DISCHARGE DRILLING OF Ti-6Al-4V ALLOY
    Yadav, Umacharan Singh
    Yadava, Vinod
    MACHINING SCIENCE AND TECHNOLOGY, 2015, 19 (04) : 515 - 535
  • [22] Experimental investigation on effective use of machining parameters in electric discharge machining for machining micro-holes in Ti-6Al-4V
    Anthuvan, Rex Naveen
    Krishnaraj, Vijayan
    Xu, Jinyang
    Chealvan, Selvarajan Hari
    Balaji, Chellapandian
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2025,
  • [23] Influence of drinking water and graphite powder concentration on electrical discharge machining of Ti-6Al-4V alloy
    Gugulothu, Bhiksha
    Rao, G. Krishna Mohana
    Rao, D. Hanumantha
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 294 - 300
  • [24] Optimization by Grey Relational Analysis of EDM Parameters on Machining Ti-6Al-4V
    Xie, Zhiping
    Zheng, Jiming
    Quan, Bianli
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 540 - +
  • [25] Optimization of the EDM parameters on machining Ti-6Al-4V with multiple quality characteristics
    Kao, J. Y.
    Tsao, C. C.
    Wang, S. S.
    Hsu, C. Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 47 (1-4): : 395 - 402
  • [26] Influence of process variables in the abrasive mixed electrical discharge machining of Ti-6Al-4V
    Shard, Abhinav
    Vinayak, Karan Singh
    Deepshikha
    MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 107 - 114
  • [27] Surface integrity of Ti-6Al-4V alloy in hybrid electrical discharge machining processes
    Khosrozadeh, Behnam
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (05) : 2258 - 2267
  • [28] PREDICTION OF SURFACE ROUGHNESS OF TI-6AL-4V IN ELECTRICAL DISCHARGE MACHINING: A REGRESSION MODEL
    Khan, Md. Ashikur Rahman
    Rahman, M. M.
    Kadirgama, K.
    Maleque, M. A.
    Ishak, M.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2011, 1 : 16 - 24
  • [29] EXPERIMENTAL INVESTIGATION OF OPTIMAL ED MACHINING PARAMETERS FOR Ti-6Al-4V BIOMATERIAL
    Bhui, Amandeep Singh
    Singh, Gurpreet
    Sidhu, Sarabjeet Singh
    Bains, Preetkanwal Singh
    FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, 2018, 16 (03) : 337 - 345
  • [30] An Experimental and Numerical Study on Orthogonal Machining of Ti-6Al-4V Alloy
    Krishnaraj, Vijayan
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2016, 16 (04) : 209 - 213
12345