NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads

被引：0

作者：

Marchand, Luc ^{[1
]}

Laviolette, Daniel ^{[1
]}

Derenne, Michel ^{[1
]}

机构：

[1] Tightness Test./Research Laboratory, Ecole Polytechnique, Montreal, Que., Canada

来源：

Welding Research Council Bulletin | 2000年 / 450期

关键词：

Bending moments - Compressive stress - Flanges - Pressure effects - Stress concentration - Stress relaxation - Welds;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effect of external bending moments on the behavior of two types of ASME NPS 4 class bolted flanged joints was investigated. The joints with weld neck flanges and another with lap joint flanges were tested under three different initial bolt stress levels. During the tests, the joint leak rate, the gasket contact stress distribution, the bolt loads, and the flange rotations were recorded as a function of the bending moment applied. The available test results show that this method gives the conservative estimates that are too simplistic for the accurate joint tightness calculations.

引用

页码：1 / 20

共 50 条

[41] Bolted flange joints equipped with FBG sensors in industrial piping systems subjected to seismic loads
Paolacci, F.
Quinci, G.
Nardin, C.
Vezzari, V.
Marino, A.
Ciucci, M.
Journal of Loss Prevention in the Process Industries, 2021, 72
[42] Probabilistic Assessment of Degree of Bending in Tubular X-Joints of Offshore Structures Subjected to Bending Loads
Ahmadi, Hamid
Ghaffari, Amirreza
ADVANCES IN CIVIL ENGINEERING, 2015, 2015
[43] THE CHARACTERISTICS OF BOLTED JOINTS SUBJECTED TO EXTERNAL BENDING MOMENTS (ANALYSIS OF THE CASE WHERE CLAMPED PARTS ARE PIPE FLANGES BY 3-DIMENSIONAL THEORY OF ELASTICITY)
SAWA, T
MOROHOSHI, T
YAMAMOTO, K
JSME INTERNATIONAL JOURNAL, 1987, 30 (270): : 2018 - 2026
[44] Finite Element Verification on Critical Loads of Vessels Subjected to External Pressure
Ji Jing
Yang Dan
Zhang Yun-Feng
THIRD INTERNATIONAL CONFERENCE ON MODELING, SIMULATION AND OPTIMIZATION (CMSO 2010), 2010, : 13 - 16
[45] ON THE CHARACTERISTIC OF A BOLTED JOINT SUBJECTED TO AN EXTERNAL BENDING MOMENT - THE CASE WHERE CLAMPED PARTS ARE CIRCULAR FLANGES
SAWA, T
TAIRA, Z
SHIRAISHI, H
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1984, 27 (224): : 348 - 354
[46] Bending Capacity of Pipe-in-Pipe Systems Subjected to External Pressure
Binazir, A.
Karampour, H.
Gilbert, B. P.
Guan, H.
PROCEEDINGS OF THE 25TH AUSTRALASIAN CONFERENCE ON MECHANICS OF STRUCTURES AND MATERIALS (ACMSM25), 2020, 37 : 657 - 666
[47] Experimental plastic loads of cracked plain pipes subjected to internal pressure and bending
Yahiaoui, K.
Moreton, D.N.
Moffat, D.G.
American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2000, 404 : 55 - 62
[48] Limit states for the ultimate strength of tubulars subjected to pressure, bending and tension loads
Moan, Torgeir
Estefen, Segan F.
Saevik, Svein
Zimmer, R.A.
Marine Structures, 1994, 7 (2-5) : 323 - 344
[49] FEM STRESS ANALYSIS AND MECHANICAL CHARACTERISTICS OF BOLTED PIPE FLANGE CONNECTIONS WITH PTFE BLENDED GASKETS SUBJECTED TO EXTERNAL BENDING MOMENTS AND INTERNAL PRESSURE
Sato, Koji
Sawa, Toshiyuki
Morimoto, Riichi
Kobayashi, Takashi
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 2, 2017,
[50] CHARACTERISTICS OF BOLTED JOINTS SUBJECTED TO EXTERNAL BENDING MOMENTS. (ANALYSIS OF THE CASE WHERE CLAMPED PARTS ARE PIPE FLANGES BY THREE-DIMENSIONAL THEORY OF ELASTICITY).
Sawa, Toshiyuki
Morohoshi, Tsuneshi
Yamamoto, Kyoichi
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (491): : 1511 - 1518

← 1 2 3 4 5 →