NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads

被引：0

作者：

Marchand, Luc ^{[1
]}

Laviolette, Daniel ^{[1
]}

Derenne, Michel ^{[1
]}

机构：

[1] Tightness Test./Research Laboratory, Ecole Polytechnique, Montreal, Que., Canada

来源：

Welding Research Council Bulletin | 2000年 / 450期

关键词：

Bending moments - Compressive stress - Flanges - Pressure effects - Stress concentration - Stress relaxation - Welds;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effect of external bending moments on the behavior of two types of ASME NPS 4 class bolted flanged joints was investigated. The joints with weld neck flanges and another with lap joint flanges were tested under three different initial bolt stress levels. During the tests, the joint leak rate, the gasket contact stress distribution, the bolt loads, and the flange rotations were recorded as a function of the bending moment applied. The available test results show that this method gives the conservative estimates that are too simplistic for the accurate joint tightness calculations.

引用

页码：1 / 20

共 50 条

[21] A Failure Analysis of Hybrid Bolted-Bonded Vertical T and L Joints with Composite Adherends Subjected to Axial and Bending Loads
E. Selahi
Mechanics of Composite Materials, 2022, 58 : 113 - 124
[22] A Failure Analysis of Hybrid Bolted-Bonded Vertical T and L Joints with Composite Adherends Subjected to Axial and Bending Loads
Selahi, E.
MECHANICS OF COMPOSITE MATERIALS, 2022, 58 (01) : 113 - 124
[23] Analytical Method of Gasket Stress on Bolted Flanged Connections in Consideration of External Bending Moments and Elements Creep
Liu, Lin
Gu, Boqin
2009 INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION, VOL II, 2009, : 750 - 753
[24] Efficient assembly of bolted joints under external loads using numerical FEM
Coria, Ibai
Martin, Inigo
Bouzid, Abdel-Hakim
Heras, Iker
Abasolo, Mikel
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 142 : 575 - 582
[25] The bending performance of T&G joints subjected to concentrated loads
Moarcas, O
Nicholls, T
Thomas, W
Matthews, B
HOLZ ALS ROH-UND WERKSTOFF, 2001, 58 (06) : 448 - 455
[26] The bending performance of T&G joints subjected to concentrated loads
Odette Moarcas
Trevor Nicholls
Wilfred Thomas
Brian Matthews
Holz als Roh- und Werkstoff, 2001, 58 : 448 - 455
[27] 3D prestressed ring joints subjected to bending loads
Karabalis, DL
Stathopoulos, ND
COMPUTATIONAL FLUID AND SOLID MECHANICS 2003, VOLS 1 AND 2, PROCEEDINGS, 2003, : 374 - 377
[28] Finite element analysis on bolted flange connection subjected to bending moment and thermal loads
Nagata, Satoshi
Sawa, Toshiyuki
Proceedings of the ASME Pressure Vessels and Piping Conference 2005, Vol 2, 2005, 2 : 139 - 145
[29] NUMERICAL AND EXPERIMENTAL FAILURE ANALYSIS OF COMPOSITE LAMINATES WITH BOLTED JOINTS UNDER BENDING LOADS
CHEN, WH
LEE, SS
JOURNAL OF COMPOSITE MATERIALS, 1995, 29 (01) : 15 - 36
[30] Titanium pipes subjected to bending moment and external pressure
Bjorset, A
Remseth, S
Leira, BJ
Larsen, CM
COMPUTERS & STRUCTURES, 2003, 81 (30-31) : 2691 - 2704

← 1 2 3 4 5 →