NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads

被引：0

作者：

Marchand, Luc ^{[1
]}

Laviolette, Daniel ^{[1
]}

Derenne, Michel ^{[1
]}

机构：

[1] Tightness Test./Research Laboratory, Ecole Polytechnique, Montreal, Que., Canada

来源：

Welding Research Council Bulletin | 2000年 / 450期

关键词：

Bending moments - Compressive stress - Flanges - Pressure effects - Stress concentration - Stress relaxation - Welds;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effect of external bending moments on the behavior of two types of ASME NPS 4 class bolted flanged joints was investigated. The joints with weld neck flanges and another with lap joint flanges were tested under three different initial bolt stress levels. During the tests, the joint leak rate, the gasket contact stress distribution, the bolt loads, and the flange rotations were recorded as a function of the bending moment applied. The available test results show that this method gives the conservative estimates that are too simplistic for the accurate joint tightness calculations.

引用

页码：1 / 20

共 50 条

[1] Part 2: Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads
Marchand, Luc
Derenne, Michel
Welding Research Council Bulletin, 2002, (473): : 18 - 55
[2] ON THE CHARACTERISTICS OF RECTANGULAR BOLTED FLANGED CONNECTIONS WITH GASKETS SUBJECTED TO EXTERNAL TENSILE LOADS AND BENDING MOMENTS
MOROHOSHI, T
SAWA, T
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1994, 116 (02): : 207 - 215
[3] On the effect of external bending loads in bolted flange joints
Bouzid, Abdel-Hakim
Birembaut, Yves
Lejeune, Hubert
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 2: COMPUTER APPLICATIONS/TECHNOLOGY AND BOLTED JOINTS, 2008, : 115 - 123
[4] On the Effect of External Bending Loads in Bolted Flange Joints
Bouzid, Abdel-Hakim
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (02):
[5] STIFFNESS OF FLANGED JOINTS SUBJECTED TO A BENDING MOMENT
VYAKHKHI, IE
SOVIET ENGINEERING RESEARCH, 1987, 7 (09): : 28 - 31
[6] STRESS ANALYSIS AND A DESIGN METHOD FOR BOLTED PIPE FLANGED JOINTS SUBJECTED TO INTERNAL PRESSURE
Sawa, Toshiyuki
Kobayashi, Takashi
Tsuji, Hirokazu
Nagata, Satoshi
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2009, VOL 2, 2010, : 157 - 167
[7] Improved Analysis of External Loads on Flanged Joints
Brown, Warren
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 3: DESIGN AND ANALYSIS, 2014,
[8] Modeling and Analysis of a Bolted Flanged Pipe Joint Subjected to Bending
Choudhury, Mahbuboor Rahman
Quayyum, Shahriar
Amanat, Khan Mahmud
COMPUTATIONAL ENGINEERING IN SYSTEMS APPLICATIONS, 2008, : 256 - 261
[9] FRP bolted flanged connections subjected to longitudinal bending moments
Blach, AE
COMPUTER AIDED DESIGN IN COMPOSITE MATERIAL TECHNOLOGY V, 1996, : 11 - 20
[10] Mechanical Characteristics and Design Method for Bolted Circular Flange Joints Subjected to External Tensile Loads
Sawa, Shunichiro
Ishimura, Mitsutoshi
Sekiguchi, Yasuhisa
Sawa, Toshiyuki
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,

← 1 2 3 4 5 →