Preparation technique and application of Al-1%Si alloy rod produced by the ohno continuous casting process

被引：0
|
作者：
Quo, Chang-Yang [1 ]
Wang, Zi-Dong [1 ]
Bo, Xi-Hui [1 ]
机构：
[1] Sch. of Mat. Science and Eng., Univ. of Sci. and Technol. Beijing, Beijing 100083, China
来源：
Zhuzao/Foundry | 2005年 / 54卷 / 02期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, a self-made vacuum melting and argon-shield continuous unidirectional solidification equipment is used to produce Al-1%Si alloy rod 8 mm in diameter with continuous columnar Structure. The plasticity of the bar made through this technology is very excellent. The alloy rod 8 mm in diameter can be drawn to ultra-fine wires in diameter of 20 μm at room temperature without any heat treatments, the elongation multiple is as high as 160000. This sort of ultra-fine wires can be used as bonding wires of electronics packaging in 1C industry.
引用
收藏
页码：126 / 128
相关论文
共 50 条
  • [31] Effect of high-intensity ultrasonic on the solidification of Al-1%Si alloy by horizontally continuous cast
    Li Xintao
    Zhao Jianqiang
    Ning Shaobin
    Li Tingju
    Li Ximeng
    Jin Junze
    Yin Guomao
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 284 - 287
  • [32] Continuous casting of semisolid Al-Si-Mg alloy
    Motegi, T
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2001, : 468 - 475
  • [33] Continuous casting of semisolid Al-Si-Mg alloy
    Motegi, Tetsuichi
    International Journal of Materials and Product Technology, 2001, (SPEC ISS. VOL.2) : 468 - 475
  • [34] Structure and Properties of the Al-1% Ca-0.5% Fe-0.25% Si-0.5% Zr Alloy Produced via Casting in an Electromagnetic Crystallizer
    Korotkova, N. O.
    Cherkasov, S. O.
    Timofeev, V. N.
    Aksenov, A. A.
    PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (07): : 725 - 730
  • [35] Effects of isothermal process parameters on semisolid microstructure of Mg-8%Al-1% Si alloy
    Cao Li-jie
    Ma Guo-rui
    Tang Chun-chong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (10) : 2364 - 2369
  • [36] Particle stabilization of plastic flow in nanostructured Al-1 %Si Alloy
    Huang, Tianlin
    Li, Chao
    Wu, Guilin
    Yu, Tianbo
    Liu, Qing
    Hansen, Niels
    Huang, Xiaoxu
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (19) : 6667 - 6673
  • [37] Mechanical properties of Al-Si-Cu alloys produced by the twin rolled continuous casting process
    Okayasu, Mitsuhiro
    Sato, Ryo
    Takasu, Satoshi
    Niikura, Akio
    Shiraishi, Tetsuro
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 : 614 - 623
  • [38] Production and characterization of Al-Cu binary alloy produced by using novel continuous casting process
    Biswas, Prasenjit
    Patel, Deepak
    Kundu, Amrik
    Poddar, Shashank
    Kundu, Arjun
    Mallik, Archana
    Das, Sanjeev
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2023, 114 (4-5) : 368 - 377
  • [39] Al-CuAl2 eutectic structure in unidirectionally solidified rods by the Ohno continuous casting process
    Motoyasu, G
    Soda, H
    McLean, A
    Shimizu, T
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1997, 16 (07) : 566 - 568
  • [40] Particle stabilization of plastic flow in nanostructured Al-1 %Si Alloy
    Tianlin Huang
    Chao Li
    Guilin Wu
    Tianbo Yu
    Qing Liu
    Niels Hansen
    Xiaoxu Huang
    Journal of Materials Science, 2014, 49 : 6667 - 6673
12345