Preparation technique and application of Al-1%Si alloy rod produced by the ohno continuous casting process

被引：0
|
作者：
Quo, Chang-Yang [1 ]
Wang, Zi-Dong [1 ]
Bo, Xi-Hui [1 ]
机构：
[1] Sch. of Mat. Science and Eng., Univ. of Sci. and Technol. Beijing, Beijing 100083, China
来源：
Zhuzao/Foundry | 2005年 / 54卷 / 02期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper, a self-made vacuum melting and argon-shield continuous unidirectional solidification equipment is used to produce Al-1%Si alloy rod 8 mm in diameter with continuous columnar Structure. The plasticity of the bar made through this technology is very excellent. The alloy rod 8 mm in diameter can be drawn to ultra-fine wires in diameter of 20 μm at room temperature without any heat treatments, the elongation multiple is as high as 160000. This sort of ultra-fine wires can be used as bonding wires of electronics packaging in 1C industry.
引用
收藏
页码：126 / 128
相关论文
共 50 条
  • [1] Directional continuous casting process and its application to Al-1%Si alloy
    Lim, CY
    Kang, SB
    JOURNAL OF MATERIALS PROCESSING & MANUFACTURING SCIENCE, 1995, 4 (01): : 17 - 24
  • [2] MICROSTRUCTURE OF BINARY Mg-Al EUTECTIC ALLOY WIRES PRODUCED BY THE OHNO CONTINUOUS CASTING PROCESS
    Z.M.Zhang~* T.Lü C.J.Xu X.F.Guo School of Materials Science & Engineering
    ActaMetallurgicaSinica(EnglishLetters), 2008, (04) : 275 - 281
  • [3] Microstructure of binary Mg-Al eutectic alloy wires produced by the Ohno continuous casting process
    School of Materials Science and Engineering, Xi'an University of Technology, Xi'an, 710048, China
    Acta Metal. Sin., 2008, 4 (275-281):
  • [4] EFFECTS OF PROCESS VARIABLES ON CAST SURFACE QUALITY OF ALLOY ROD PRODUCED BY THE HORIZONTAL OHNO CONTINUOUS-CASTING (OCC) PROCESS
    SODA, H
    MOTOYASU, G
    MCLEAN, A
    OHNO, A
    CANADIAN METALLURGICAL QUARTERLY, 1994, 33 (02) : 89 - 98
  • [5] Mechanical properties of Al-Si13-Ni1.4-Mg1.4-Cu1 alloys produced by the Ohno continuous casting process
    Okayasu, Mitsuhiro
    Yoshie, Shigeki
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (13-14): : 3120 - 3126
  • [6] Microstructure and material properties of an Al-Cu alloy provided by the Ohno continuous casting technique
    Okayasu, Mitsuhiro
    Takasu, Satoshi
    Yoshie, Shigeki
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (11) : 1529 - 1535
  • [7] The effects of Ti and Sr on the microstructures of Al-11.3 wt.%Si alloys produced by the ohno continuous casting process
    M. H. Kim
    C. H. Jung
    H. H. Jo
    C. S. Kang
    Metals and Materials, 2000, 6 : 235 - 240
  • [8] The effects of Ti and Sr on the microstructures of Al-11.3 wt. %Si alloys produced by the Ohno continuous casting process
    Kim, MH
    Jung, CH
    Jo, HH
    Kang, CS
    METALS AND MATERIALS-KOREA, 2000, 6 (03): : 235 - 240
  • [9] Structure, properties and performance of alloys produced by the Ohno Continuous Casting process
    Soda, H
    McLean, A
    Motoyasu, G
    Ohno, A
    Yamazaki, H
    Shimizu, T
    PROCEEDINGS OF THE MERTON C FLEMINGS SYMPOSIUM ON SOLIDIFICATION AND MATERIALS PROCESSING, 2001, : 513 - 518
  • [10] Effect of ultrasonic field on the structures and mechanical properties of horizontal continuous casting ingots of Al-1%Si alloy
    Gao Xuepeng
    Li Xintao
    Qie Xiwang
    Wu Yaping
    Li Ximeng
    Li Tingju
    ACTA METALLURGICA SINICA, 2007, 43 (01) : 17 - 22
12345