The mechanical scheme of tube preform deformation in the process of hole mandreling

被引：0
|
作者：
Isaev, A.N.
机构：
来源：
Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem) | 2001年 / 04期
关键词：
Billets (metal bars) - Carbon steel - Deformation - Elasticity - Parameter estimation - Plasticity - Punching;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
New conceptions on the mechanics of deformation of tube preform by conical mandrel are set forth. Deformation zone is presented in the form of live consecutive parts blended from one to another, on of which is contacted with the die. There are determined geometrical parameters of out-of-contact parts being in elastic and plastic states. The results of calculation of technological parameters of hole mandreling process according to analytical dependencies developed are in good agreement with experimental data.
引用
收藏
页码：6 / 11
相关论文
共 50 条
  • [31] The mechanical deformation process of electrospun polymer nanocomposite fibers
    Kim, GM
    Lach, R
    Michler, GH
    Chang, YW
    MACROMOLECULAR RAPID COMMUNICATIONS, 2005, 26 (09) : 728 - 733
  • [32] A preform deformation and resin flow coupled model including the cure kinetics and chemo-rheology for the VARTM process
    Da Wu
    Ragnar Larsson
    Brina Blinzler
    International Journal of Material Forming, 2021, 14 : 421 - 434
  • [33] INTENSIVE PLASTIC DEFORMATION AND TITANIUM STRENGTHENING IN THE PROCESS OF ROTATIONAL TUBE ROLLING
    Bataev, I. A.
    Makarova, E. B.
    Popeluyh, A., I
    Zhuravina, T., V
    Pavluykova, D., V
    Ruktuev, A. A.
    Bataeva, Z. B.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2010, (02): : 32 - 35
  • [34] The wall deformation and the diameter reduction in the process of tube drawing with a floating plug
    Hatalak, R
    Swiatkowski, K
    ARCHIVES OF METALLURGY, 2002, 47 (03): : 275 - 285
  • [35] Influence of Heating Models on Necking Deformation during tube Extrusion Process
    Liu, Guihua
    Guo, Yongqiang
    Jiang, Zhi
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 1778 - 1781
  • [36] EFFECT OF THICKNESS ON TUBE DEFORMATION MECHANICS DURING LOW PRESSURE TUBE HYDROFORMING PROCESS SEQUENCE VARIATION
    Nikhare, Chetan P.
    PROCEEDINGS OF THE ASME 2020 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2020, VOL 2A, 2020,
  • [37] The Deformation Behavior and Microstructure Evolution of Cladding Tube during Spinning Composite Process of Mg/Al Tube
    Zheng, Jia-bin
    Shu, Xue-dao
    Li, Zi-xuan
    Xiang, Wei
    Xu, Yue-chen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [38] An overview of the microstructure and mechanical properties of copper tube by SPD process
    Bodkhe, Mohan
    Sharma, Sanjeev
    Mourad, Abdel-Hamid, I
    Sharma, Pritam Babu
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 4289 - 4294
  • [39] Deformation behavior, microstructure and mechanical properties of pure copper subjected to tube hydroforming
    Chen, Mingtao
    Xiao, Xiaoting
    Guo, Heng
    Tong, Jianghuai
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 731 : 331 - 343
  • [40] Effect of deformation temperature on mechanical properties and microstructure of TWIP steel for expansion tube
    Xue Haitao
    Wang Dengke
    Song Kaihong
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2020, 39 (01) : 63 - 73
12345