The mechanical scheme of tube preform deformation in the process of hole mandreling

被引：0
|
作者：
Isaev, A.N.
机构：
来源：
Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem) | 2001年 / 04期
关键词：
Billets (metal bars) - Carbon steel - Deformation - Elasticity - Parameter estimation - Plasticity - Punching;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
New conceptions on the mechanics of deformation of tube preform by conical mandrel are set forth. Deformation zone is presented in the form of live consecutive parts blended from one to another, on of which is contacted with the die. There are determined geometrical parameters of out-of-contact parts being in elastic and plastic states. The results of calculation of technological parameters of hole mandreling process according to analytical dependencies developed are in good agreement with experimental data.
引用
收藏
页码：6 / 11
相关论文
共 50 条
  • [1] Preform design for formability enhancement of tube hydroforming process using deformation history
    Song, Woo-Jin
    Choi, Han-Ho
    Kim, Keun-Hwan
    Park, Sung-Ho
    Kim, Jeong
    Kang, Beom-Soo
    ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2, 2007, 340-341 : 593 - +
  • [2] Simulation of the process of tube preform forming
    Oding, S.S.
    Klimenkov, A.N.
    Kuznechno-Shtampovochnoe Proizvodstvo, 1999, (03): : 6 - 7
  • [3] Study of preform and loading rate in the tube nosing process by spherical die
    Lu, YH
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2005, 194 (25-26) : 2839 - 2858
  • [4] Simulation Prediction of the Preform Deformation and Resin Flow in Vacuum Infusion Process
    Yang, Bo
    Jin, Tianguo
    Li, Jianguang
    Bi, Fengyang
    POLYMER COMPOSITES, 2014, 35 (10) : 1968 - 1979
  • [5] Influence of Mechanical Properties of Tube on Forming Limits and Deformation Characteristics in an Expansion Drawing Process
    Zhang, S. L.
    Kuboki, T.
    Akiyama, M.
    Kajikawa, S.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2024, 146 (07):
  • [6] Deformation analysis of tube expanding process
    Shanghai University, Shanghai 200072, China
    Suxing Gongcheng Xuebao, 2006, 3 (52-55):
  • [7] Sensitivity analysis of viscoplastic deformation process with application to metal preform design optimization
    Kang, Zhan
    Luo, Yangjun
    ENGINEERING OPTIMIZATION, 2012, 44 (12) : 1511 - 1523
  • [8] Deformation and mechanical analyses of silo foil tube
    Fenyvesi, L.
    Bellus, Z.
    Csorba, L.
    Csatar, A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2011, 225 (C11) : 2565 - 2574
  • [9] Microstructure and mechanical properties of fine grain seamless Nb tube by a novel shear deformation process
    Balachandran, S.
    Seymour, N.
    Mezyenski, R.
    Barber, R.
    Hartwig, K. T.
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 60, 2014, 1574 : 197 - 203
  • [10] INVESTIGATION OF THE RELATION BETWEEN TUBE SPACING AND TUBE SHEET DEFORMATION IN HEAT EXCHANGERS DUE TO THE MECHANICAL ROLLING PROCESS: A NUMERICAL STUDY
    Madsen, Soren Bogelund
    Ibsen, Claus Hessler
    Gervang, Bo
    Kristensen, Anders Schmidt
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 2B, 2016,
12345