High-precision microseismic monitoring system to reasonable width of segment coal pillar in extra-thick coal seam fully mechanized top-coal caving mining

被引：0
|
作者：
Kong, Ling-Hai [1 ,2 ]
Jiang, Fu-Xing [1 ,2 ]
Liu, Jie [3 ]
Ye, Gen-Xi [1 ,2 ]
Wang, Cun-Wen [1 ,2 ]
Song, Guang-Dong [1 ,2 ]
机构：
[1] State Key Laboratory of High-efficient Mining and Safety of Metal Mines, Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China
[2] School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China
[3] Datangtashan Colliery, Datong Coal Mine Group, Datong 037003, China
来源：
Meitan Xuebao/Journal of the China Coal Society | 2009年 / 34卷 / 07期
关键词：
Coal mines - Coal - Microseismic monitoring - Room and pillar mining - Coal deposits;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
By using the underground high-precision microseismic monitoring system, studied the strata movement in full-seam mining over 15 m thick in fully mechanized top-coal caving mining workface. Distance was obtained between high stress zone and the entry rib by combining rock mechanics calculating with strata movement consequence analysis. By comparing with numerical simulation results, the inferred result by MS was proved right. Result shows the reasonable width of segment coal pillar is 20-25 m, considering many factors.
引用
收藏
页码：871 / 874
相关论文
共 50 条
  • [31] Research on top coal caving technique in steep and extra-thick coal seam
    Zhang, Juguo
    Zhao, Zhiqiang
    Gao, Yang
    SECOND INTERNATIONAL CONFERENCE ON MINING ENGINEERING AND METALLURGICAL TECHNOLOGY (MEMT 2011), 2011, 2 : 145 - 149
  • [32] Effect of floor failure in fully mechanized caving of extra-thick coal seam in Datong Mining Area
    Duan H.
    Zhao L.
    Chen Y.
    Arabian Journal of Geosciences, 2021, 14 (11)
  • [33] Experimental study ontop-coal breaking and moving rulesduring fully mechanized top-coal caving mining in extremely thick coal seam
    Lyu H.
    Wang Z.
    Tang Y.
    Zhang L.
    Liu F.
    Zhang Y.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2019, 38 (03): : 476 - 486
  • [34] Characteristics of stope migration and roadway surrounding rock fracture for fully-mechanized top-coal caving face in steeply dipping and extra-thick coal seam
    Wang, N.-B. (wnbmm@163.com), 1600, China Coal Society (38):
  • [35] Flow of top coal and roof rock and loss of top coal in fully mechanized top coal caving mining of extra thick coal seams
    Zhang, Ningbo
    Liu, Changyou
    Yang, Peiju
    ARABIAN JOURNAL OF GEOSCIENCES, 2016, 9 (06)
  • [36] Flow of top coal and roof rock and loss of top coal in fully mechanized top coal caving mining of extra thick coal seams
    Ningbo Zhang
    Changyou Liu
    Peiju Yang
    Arabian Journal of Geosciences, 2016, 9
  • [37] Research on the Height of Water Flowing Fractured Zone of Fully Mechanized Caving Mining in Extra-thick Coal Seam
    Feng Shaojie
    Sun Shiguo
    Lv Yuguo
    Lv Ji
    ISMSSE 2011, 2011, 26
  • [38] Reasonable stopping method and retracement channel support at fully mechanized top coal caving working face of 15 m extra-thick coal seam: A case study
    Xie, Shengrong
    Wu, Yiyi
    Ma, Xiang
    Chen, Dongdong
    Guo, Fangfang
    Jiang, Zaisheng
    Li, Hui
    Zou, Hang
    Liu, Ruipeng
    Zhang, Xiao
    ENERGY SCIENCE & ENGINEERING, 2022, 10 (12) : 4336 - 4357
  • [39] Fault activation of fully mechanized caving face in extra-thick coal seam of deep shaft
    Zhu S.
    Jiang F.
    Kouame K.J.A.
    Li X.
    Tan W.
    Zhang B.
    Zhang H.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2016, 35 (01): : 50 - 58
  • [40] Numerical simulation of longwall top-coal caving with extra-thick and hard coal seam based on bonded particle model
    Xu Y.
    Wang G.
    Li M.
    He M.
    Zhang J.
    Zhou C.
    Han H.
    Meitan Xuebao/Journal of the China Coal Society, 2019, 44 (11): : 3317 - 3328
12345