High-precision microseismic monitoring system to reasonable width of segment coal pillar in extra-thick coal seam fully mechanized top-coal caving mining

被引:0
|
作者
Kong, Ling-Hai [1 ,2 ]
Jiang, Fu-Xing [1 ,2 ]
Liu, Jie [3 ]
Ye, Gen-Xi [1 ,2 ]
Wang, Cun-Wen [1 ,2 ]
Song, Guang-Dong [1 ,2 ]
机构
[1] State Key Laboratory of High-efficient Mining and Safety of Metal Mines, Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China
[2] School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China
[3] Datangtashan Colliery, Datong Coal Mine Group, Datong 037003, China
来源
关键词
Coal mines - Coal - Microseismic monitoring - Room and pillar mining - Coal deposits;
D O I
暂无
中图分类号
学科分类号
摘要
By using the underground high-precision microseismic monitoring system, studied the strata movement in full-seam mining over 15 m thick in fully mechanized top-coal caving mining workface. Distance was obtained between high stress zone and the entry rib by combining rock mechanics calculating with strata movement consequence analysis. By comparing with numerical simulation results, the inferred result by MS was proved right. Result shows the reasonable width of segment coal pillar is 20-25 m, considering many factors.
引用
收藏
页码:871 / 874
相关论文
共 50 条
  • [21] Prevention and control for coal spontaneous combustionin by fully mechanized top-coal caving of extremely thick coal seam
    Sun Hongru
    Wang Jiachen
    Fan Zhizhong
    Zhang Junbo
    MINE HAZARDS PREVENTION AND CONTROL TECHNOLOGY, 2007, : 186 - 191
  • [22] Study on top-coal migration law and reasonable top-coal caving parameters in fully-mechanized top-coal caving face
    Wang S.
    Yuan Y.
    Zhu C.
    Yuan C.
    Zhong H.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (05): : 104 - 109
  • [23] Impact mechanism of clamped coal pillar in sublevel fully mechanized top coal caving in the near vertical extra thick coal seam
    Yuan C.
    Wang Y.
    Shi X.
    Chang Q.
    Zhang B.
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2023, 40 (01): : 60 - 68
  • [24] An analytical methodology of rock burst with fully mechanized top-coal caving mining in steeply inclined thick coal seam
    Shan, Pengfei
    Yan, Zhongming
    Lai, Xingping
    Xu, Huicong
    Hu, Qinxin
    Guo, Zhongan
    SCIENTIFIC REPORTS, 2024, 14 (01)
  • [25] Movement of roof strata in extra-thick coal seams in top-coal caving mining based on a high precision micro-seismic monitoring system
    Kong, Ling-Hai
    Jiang, Fu-Xing
    Yang, Shu-Hua
    Song, Jin-Wang
    Wang, Cun-Wen
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2010, 32 (05): : 552 - 558
  • [26] An analytical methodology of rock burst with fully mechanized top-coal caving mining in steeply inclined thick coal seam
    Pengfei Shan
    Zhongming Yan
    Xingping Lai
    Huicong Xu
    Qinxin Hu
    Zhongan Guo
    Scientific Reports, 14
  • [27] Application of intelligent top-coal caving technology in overlying aquifer protection of extra-thick coal seam
    Cheng, Weixuan
    Chen, Jingchuan
    Zhang, Lihui
    Liu, Shengyou
    He, Xin
    Pan, Weidong
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2024, 52 : 249 - 258
  • [28] Mechanical Analysis of Mining Stress Transfer on Isolated Island Face in Extra-Thick Fully Mechanized Top-Coal Caving Mining
    Tu, Min
    Bu, Qingwei
    Fu, Baojie
    Wang, Yu
    GEOFLUIDS, 2020, 2020
  • [29] Top-coal caving structure and technology for increasing recovery rate at extra-thick hard coal seam
    Pang Y.-H.
    Wang G.-F.
    1600, China Coal Society (42): : 817 - 824
  • [30] Effect of elevation angle of coal seam on top-coal caving law in fully-mechanized top-coal caving mining face during topple mining CN
    Xin H.
    Changyou L.
    Fengfeng W.
    Keping P.
    Jingxuan Y.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2021, 49 (09): : 25 - 31