High-precision microseismic monitoring system to reasonable width of segment coal pillar in extra-thick coal seam fully mechanized top-coal caving mining

被引：0
|
作者：
Kong, Ling-Hai [1 ,2 ]
Jiang, Fu-Xing [1 ,2 ]
Liu, Jie [3 ]
Ye, Gen-Xi [1 ,2 ]
Wang, Cun-Wen [1 ,2 ]
Song, Guang-Dong [1 ,2 ]
机构：
[1] State Key Laboratory of High-efficient Mining and Safety of Metal Mines, Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China
[2] School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China
[3] Datangtashan Colliery, Datong Coal Mine Group, Datong 037003, China
来源：
Meitan Xuebao/Journal of the China Coal Society | 2009年 / 34卷 / 07期
关键词：
Coal mines - Coal - Microseismic monitoring - Room and pillar mining - Coal deposits;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
By using the underground high-precision microseismic monitoring system, studied the strata movement in full-seam mining over 15 m thick in fully mechanized top-coal caving mining workface. Distance was obtained between high stress zone and the entry rib by combining rock mechanics calculating with strata movement consequence analysis. By comparing with numerical simulation results, the inferred result by MS was proved right. Result shows the reasonable width of segment coal pillar is 20-25 m, considering many factors.
引用
收藏
页码：871 / 874
相关论文
共 50 条
  • [1] Reasonable Width of Coal Pillar in Stop Mining Line of Fully Mechanized Caving Mining in Extra-Thick Coal Seam
    Zhao Zhen
    Ma Depeng
    Liu Chuanxiao
    ELECTRONIC JOURNAL OF GEOTECHNICAL ENGINEERING, 2019, 24 (05): : 1189 - 1200
  • [2] Application of microseismic monitoring technology on fully mechanized top-coal caving face of extra-thick coal seam
    Huang, Q. G.
    Zhao, J.
    ROCK MECHANICS: ACHIEVEMENTS AND AMBITIONS, 2012, : 17 - 20
  • [3] Reasonable Width of Segment Pillar of Fully-Mechanized Caving Face in Inclined Extra-Thick Coal Seam
    Fan N.
    Wang J.
    Zhang B.
    Liu D.
    Wang R.
    Geotechnical and Geological Engineering, 2020, 38 (04) : 4189 - 4200
  • [4] Research on reasonable width of segment pillar of fully mechanized caving face in extra-thick coal seam of deep shaft
    Liu, Jinhai
    Jiang, Fuxing
    Wang, Naiguo
    Li, Zhishen
    Zhang, Zhigao
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2012, 31 (05): : 921 - 927
  • [5] Gas Distribution Law for the Fully Mechanized Top-Coal Caving Face in a Gassy Extra-Thick Coal Seam
    Wang, Wenlin
    Wang, Fangtian
    Zhao, Bin
    Li, Gang
    ADVANCES IN CIVIL ENGINEERING, 2018, 2018
  • [6] Experimental study of reasonable coal pillar width in fully mechanized top coal caving face of deep thick coal seam
    Wang, Dechao
    Li, Shucai
    Wang, Qi
    Li, Weiteng
    Wang, Fuqi
    Wang, Hongtao
    Peng, Peng
    Ruan, Guoqiang
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2014, 33 (03): : 539 - 548
  • [7] Ground control of narrow coal pillar in gob side entry driving with fully mechanized top coal caving mining in extra-thick coal seam
    Dong, Hexiang
    Journal of Mining and Strata Control Engineering, 2021, 3 (03):
  • [8] Study on zone failure characteristics of top-coal in fully-mechanized top-coal caving mining of thick coal seam
    Han, Yufeng
    Wang, Zhaohui
    Tang, Yuesong
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (07): : 99 - 107
  • [9] Research on the Redistribution Law of Lateral Mining Stress and the Bearing Characteristics of Section Coal Pillar in Extra-Thick Fully Mechanized Top-Coal Caving Mining
    Bu, Qingwei
    Tu, Min
    Fu, Baojie
    SHOCK AND VIBRATION, 2021, 2021
  • [10] Analysis of rib spalling mechanism of fully-mechanized top-coal caving face with great mining height in extra-thick coal seam
    Chang Ju-cai
    Xie Guang-xiang
    Zhang Xue-hui
    ROCK AND SOIL MECHANICS, 2015, 36 (03) : 803 - 808
12345