Effect of different abrasives on chemical mechanical polishing for magnesia alumina spinel

被引：0
|
作者：
Wang Z. [1 ]
Pang M. [1 ]
Su J. [1 ]
Yao J. [1 ,2 ]
机构：
[1] School of Mechanical and Electrical Engineering, Henan Institute of Science and Technology, Xinxiang
[2] College of Mechanical and Electrical Engineering, Nanjing Univ. of Aeronautics and Astronautics, Nanjing
来源：
Key Engineering Materials | 2020年 / 866卷
基金：
中国国家自然科学基金;
关键词：
Abrasive; Chemical mechanical polishing; Magnesium aluminate spinel; Materials removal rate; Surface quality;
D O I：
10.4028/www.scientific.net/KEM.866.115
中图分类号：
学科分类号：
摘要：
In this paper, a series of chemical mechanical polishing (CMP) experiments for magnesia alumina (Mg-Al) spinel were carried out with different abrasives, and the materials removal rate (MRR) and surface quality was evaluated to explore their different effects. The scanning electron microscope (SEM) and laser particle size analyzer were also employed to test the micro-shape and size distribution of abrasives. Then, the mechanism of different effects with different abrasives was analyzed in CMP for Mg-Al spinel. Those experimental results suggest that different subjecting pressure ratios of abrasives to polishing pad with different abrasive are the key factors leading to difference polishing performances in CMP. © 2020 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：115 / 124
页数：9
相关论文
共 50 条
  • [41] Reaction sintered magnesia rich magnesium aluminate spinel: effect of alumina reactivity
    Sarkar, R
    Ghosh, A
    Das, SK
    CERAMICS INTERNATIONAL, 2003, 29 (04) : 407 - 411
  • [42] Effect of ingredients in slurry contaming alumina on chemical mechanical polishing of hard disc substrates
    Sun, J. Z.
    Pan, G. S.
    Zhou, Y.
    Zhu, Y. H.
    Luo, J. B.
    Lu, X. C.
    Liu, Y.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J7) : 1003 - 1011
  • [43] Structural Properties Of Yttria Stabilized Zirconia With Different Nano Alumina - Magnesia Spinel Additions
    Abed, Hafidh Yousif
    Almasi-Kashi, Mohammad
    Zaidan, Shihab Ahmed
    INTERNATIONAL WORKSHOP IN PHYSICS APPLICATIONS, 2019, 1178
  • [44] The Effects of Precursors on the Morphology and Chemical Mechanical Polishing Performance of Ceria-Based Abrasives
    Zheng, Yuanyuan
    Wang, Ning
    Feng, Zongyu
    Tan, Xianmin
    Zhang, Zhenyu
    Han, Huiqing
    Huang, Xiaowei
    MATERIALS, 2022, 15 (21)
  • [45] Effects of suspending abrasives on the lubrication properties of slurry in chemical mechanical polishing of silicon wafer
    Liu, JY
    Jin, ZJ
    Guo, DM
    Kang, RK
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIII, 2006, 304-305 : 359 - 363
  • [46] Chemical-Mechanical Polishing of Wafers with Copper Film by Nano-Scale Abrasives
    Tsai, Jhy-Cherng
    Kao, Jin-Fong
    ADVANCED MANUFACTURE: FOCUSING ON NEW AND EMERGING TECHNOLOGIES, 2008, 594 : 181 - 186
  • [47] Investigation on the controllable growth of monodisperse silica colloid abrasives for the chemical mechanical polishing application
    Hu, XiaoKai
    Song, Zhitang
    Wang, Haibo
    Liu, Weili
    Zhang, Zefang
    MICROELECTRONIC ENGINEERING, 2010, 87 (09) : 1751 - 1755
  • [48] Effects of trivalent lanthanide (La and Nd) doped ceria abrasives on chemical mechanical polishing
    Kim, Eungchul
    Lee, Jaewon
    Bae, Chulwoo
    Seok, Hyunho
    Kim, Hyeong-U
    Kim, Taesung
    POWDER TECHNOLOGY, 2022, 397
  • [49] Influence of silica and magnesia on in situ spinel formation in alumina-magnesia castable
    Nandi, P
    Garg, A
    Singh, RK
    Chattoraj, BD
    BRITISH CERAMIC TRANSACTIONS, 2004, 103 (03): : 134 - 138
  • [50] Preparation of Surface Modified Ceria Nanoparticles as Abrasives for the Application of Chemical Mechanical Polishing (CMP)
    Cheng, Jie
    Huang, Shuo
    Lu, Xinchun
    ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2020, 9 (02)
12345