Effect of different abrasives on chemical mechanical polishing for magnesia alumina spinel

被引：0
|
作者：
Wang Z. [1 ]
Pang M. [1 ]
Su J. [1 ]
Yao J. [1 ,2 ]
机构：
[1] School of Mechanical and Electrical Engineering, Henan Institute of Science and Technology, Xinxiang
[2] College of Mechanical and Electrical Engineering, Nanjing Univ. of Aeronautics and Astronautics, Nanjing
来源：
Key Engineering Materials | 2020年 / 866卷
基金：
中国国家自然科学基金;
关键词：
Abrasive; Chemical mechanical polishing; Magnesium aluminate spinel; Materials removal rate; Surface quality;
D O I：
10.4028/www.scientific.net/KEM.866.115
中图分类号：
学科分类号：
摘要：
In this paper, a series of chemical mechanical polishing (CMP) experiments for magnesia alumina (Mg-Al) spinel were carried out with different abrasives, and the materials removal rate (MRR) and surface quality was evaluated to explore their different effects. The scanning electron microscope (SEM) and laser particle size analyzer were also employed to test the micro-shape and size distribution of abrasives. Then, the mechanism of different effects with different abrasives was analyzed in CMP for Mg-Al spinel. Those experimental results suggest that different subjecting pressure ratios of abrasives to polishing pad with different abrasive are the key factors leading to difference polishing performances in CMP. © 2020 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：115 / 124
页数：9
相关论文
共 50 条
  • [21] Design of composite abrasives and substrate materials for chemical mechanical polishing applications
    Fanning Meng
    Zhenyu Zhang
    Peili Gao
    Tingting Liu
    Yash Boyjoo
    Dongming Guo
    Applied Nanoscience, 2020, 10 : 1379 - 1393
  • [22] Research on Abrasives in the Chemical Mechanical Polishing Process for Silicon Nitride Balls
    YUAN Ju-long
    厦门大学学报(自然科学版), 2002, (S1) : 63 - 64
  • [23] Design of composite abrasives and substrate materials for chemical mechanical polishing applications
    Meng, Fanning
    Zhang, Zhenyu
    Gao, Peili
    Liu, Tingting
    Boyjoo, Yash
    Guo, Dongming
    APPLIED NANOSCIENCE, 2020, 10 (05) : 1379 - 1393
  • [24] Chemical Mechanical Polishing for Oxygen Free Copper with Manganese Oxide Abrasives
    Sato, Ryunosuke
    Ichida, Yoshio
    Morimoto, Yoshitaka
    Shimizu, Kenji
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2008, 2 (04): : 685 - 693
  • [25] Mullite-based abrasives for chemical mechanical polishing of silicon carbide
    Xu, Hanqi
    Li, Dexiang
    Wang, Zhuojie
    Song, Ping
    Zhao, Yujun
    Su, Hongjiu
    APPLIED SURFACE SCIENCE, 2025, 692
  • [26] Effect of magnesia-alumina spinel precursor sol on the sintering property of fused magnesia refractory
    Hou, Qingdong
    Luo, Xudong
    Xie, Zhipeng
    An, Di
    Zhang, Xiaofang
    Peng, Zijun
    CERAMICS INTERNATIONAL, 2019, 45 (03) : 3459 - 3464
  • [27] Effects of Magnesia Fines Addition and Spinel with Different Compositions on Thermal Expansion Behavior of Alumina Magnesia Castables
    ZHANG Qiaoyan
    China's Refractories, 2012, 21 (02) : 23 - 27
  • [28] Effect of Nano-sized CeO2 Abrasives on Chemical Mechanical Polishing of Silicon Wafer
    ZHANG Bao-sen 1
    2. Department of Materials Engineering
    Semiconductor Photonics and Technology, 2006, (02) : 81 - 84
  • [29] Chemical mechanical polishing performances by filtering and retreatment of used silica abrasives slurry
    Seo, YJ
    Park, SW
    Kim, NH
    Chang, EG
    Lee, WS
    MICROELECTRONIC ENGINEERING, 2005, 77 (3-4) : 358 - 364
  • [30] Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing
    Gao, Peili
    Liu, Tingting
    Zhang, Zhenyu
    Meng, Fanning
    Ye, Run-Ping
    Liu, Jian
    SCIENCE CHINA-MATERIALS, 2021, 64 (11) : 2747 - 2763
12345