UPLIFT LOAD TEST USING UNIT TEST SPECIMENS FOR THE STRENGTH VERIFICATION OF TIMBER ROOF FRAMES AGAINST WIND LOAD

被引：0

作者：

Kikitsu H. ^{[1
]}

Yamazaki Y. ^{[2
]}

Takadate Y. ^{[3
]}

机构：

[1] Building Dept., National Institute for Land and Infrastructure Management

[2] Dept. of Building Materials and Components, Building Research Institute

[3] Dept. of Structural Engineering, Building Research Institute

来源：

AIJ Journal of Technology and Design | 2024年 / 30卷 / 74期

关键词：

Timber roof frame; Unit test specimen; Wind load;

D O I：

10.3130/aijt.30.29

中图分类号：

学科分类号：

摘要：

Uplift load tests were carried out using two types of unit test specimens that reproduced timber roof frame. From the test using the unit test specimen of the rafter joint, it was confirmed that the method based on the simple beam model in the usual design gives the same result as this result. From the test using unit test specimens that reflect the part of roof frame, the authors tried to understand the damage process progress of the entire roof frame and to calculate the strength of the roof frame, and then compared it with the wind load. © 2024 Architectural Institute of Japan. All rights reserved.

引用

页码：29 / 34

页数：5

共 32 条

[31] Strength properties of an aluminum alloy car body structure for high speed railway vehicle (3rd report, strength reliability evaluation of an actual car body using fatigue test of an experimental car body under pressure load)
Takeichi, Michifumi
Okuno, Sumio
Tsuruda, Hitoshi
Okazaki, Masato
Hirose, Susumu
Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2002, 68 (02): : 335 - 342
[32] This paper presents a solution of a short term hydrothermal scheduling problem using Evolutionary Computing technique. The technique is used to handle the problems of short-term hydrothermal scheduling and economic load dispatch while satisfying hydraulic and thermal constraints in order to minimize the total system cost.: This technique is tested on a system consisting of a hydroplant and a steam unit and the test results are compared with those obtained using λ-γ iteration and genetic algorithm method.
Rahimullah, B. N. S.
Rahman, T. K. Abdul
2006 4TH STUDENT CONFERENCE ON RESEARCH AND DEVELOPMENT, 2006, : 219 - 222

← 1 2 3 4 →