UPLIFT LOAD TEST USING UNIT TEST SPECIMENS FOR THE STRENGTH VERIFICATION OF TIMBER ROOF FRAMES AGAINST WIND LOAD

被引：0

作者：

Kikitsu H. ^{[1
]}

Yamazaki Y. ^{[2
]}

Takadate Y. ^{[3
]}

机构：

[1] Building Dept., National Institute for Land and Infrastructure Management

[2] Dept. of Building Materials and Components, Building Research Institute

[3] Dept. of Structural Engineering, Building Research Institute

来源：

AIJ Journal of Technology and Design | 2024年 / 30卷 / 74期

关键词：

Timber roof frame; Unit test specimen; Wind load;

D O I：

10.3130/aijt.30.29

中图分类号：

学科分类号：

摘要：

Uplift load tests were carried out using two types of unit test specimens that reproduced timber roof frame. From the test using the unit test specimen of the rafter joint, it was confirmed that the method based on the simple beam model in the usual design gives the same result as this result. From the test using unit test specimens that reflect the part of roof frame, the authors tried to understand the damage process progress of the entire roof frame and to calculate the strength of the roof frame, and then compared it with the wind load. © 2024 Architectural Institute of Japan. All rights reserved.

引用

页码：29 / 34

页数：5

共 32 条

[21] Case study: using the point load test to estimate rock strength of tunnels constructed by a tunnel boring machine
Liu, Quan-Sheng
Zhao, Yi-Fan
Zhang, Xiao-Ping
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2019, 78 (03) : 1727 - 1734
[22] Static Wind Load Evaluation under Steady-State Wind Flow for 2-Edge Sloped Box Girder by Using Wind Tunnel Test
Lee, Hoyeop
Moon, Jiho
ADVANCES IN CIVIL ENGINEERING, 2019, 2019
[23] The effect of laser surface textures on the adhesion strength and corrosion protection of organic coatings-Experimental assessment using the pull-off test and the shaft load blister test
Caraguay, S. J.
Pereira, T. S.
Cunha, A.
Pereira, M.
Xavier, F. A.
PROGRESS IN ORGANIC COATINGS, 2023, 180
[24] In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test
Kazemi, Mostafa
Hajforoush, Mohammad
Talebi, Pouyan Khakpour
Daneshfar, Mohammad
Shokrgozar, Ali
Jahandari, Soheil
Saberian, Mohammad
Li, Jie
JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS, 2020, 9 (05) : 289 - 306
[25] Evaluation of the COBAS® AmpliPrep/COBAS® TaqMan® HCV Test v2.0 for HCV viral load monitoring using dried blood spot specimens
Marins, Ed. G.
Bodinaidu, Keerthi
Lin, Matthew
Deforest, Alison
JOURNAL OF VIROLOGICAL METHODS, 2017, 247 : 77 - 80
[26] Investigating the Accuracy of Specimen Shape for Point Load Index Test in Predicting the Uniaxial Compressive Strength for Rocks Using Regression Analysis and Machine Learning
Akbay, Deniz
MINING METALLURGY & EXPLORATION, 2023, 40 (6) : 2107 - 2115
[27] Investigating the Accuracy of Specimen Shape for Point Load Index Test in Predicting the Uniaxial Compressive Strength for Rocks Using Regression Analysis and Machine Learning
Deniz Akbay
Mining, Metallurgy & Exploration, 2023, 40 : 2107 - 2115
[28] Using thermal test data to determine the minimum load of a 200-MW power unit with a PK-47 boiler at the Zainsk power station
Belyakov I.I.
Breus V.I.
Barannikov A.B.
Power Technology and Engineering, 2013, Springer Science and Business Media, LLC (47) : 133 - 138
[29] Analytical Model with Independent Control of Load-Displacement Curve Branches for Brittle Material Strength Prediction Using Pre-Peak Test Loads
Kolesnikov, Gennady
Zaitseva, Maria
Petrov, Aleksey
SYMMETRY-BASEL, 2022, 14 (10):
[30] Correction to: Investigating the Accuracy of Specimen Shape for Point Load Index Test in Predicting the Uniaxial Compressive Strength for Rocks Using Regression Analysis and Machine Learning
Deniz Akbay
Mining, Metallurgy & Exploration, 2023, 40 (6) : 2117 - 2117

← 1 2 3 4 →