Multifunctional dbd-based ozone sterilizer with ultrasonic cavitation for low-temperature treatment of medical tools

被引:0
|
作者
Lozina A.S. [1 ]
Garkusha I.E. [1 ,2 ]
Shypilov S.A. [3 ]
Vorontsov P.M. [4 ]
Bolduriev I.N. [5 ]
Gnidenko Y.P. [2 ]
Taran A.V. [1 ]
Chechelnitskij O.G. [1 ]
机构
[1] National Science Center, Kharkiv Institute of Physics and Technology (NSC KIPT), Institute of Plasma Physics, Kharkiv
[2] V.N. Karazin Kharkiv National University, Kharkiv
[3] Military Medical Clinical Center of the Northern Region of the Medical Forces of the Armed Forces of Ukraine, Kharkiv
[4] Sytenko Institute of Spine and Joint Pathology, NAMS, Kharkiv
[5] Hartron-Plant Ltd, Kharkiv
关键词
Bacteria; Cleaning; COVID-19; Dielectric barrier discharge; Ozone concentration; Ozone sterilization;
D O I
10.1615/PlasmaMed.2021039629
中图分类号
学科分类号
摘要
The development of a dielectric barrier discharge (DBD) sterilizer for cleaning, disinfection, and low-temperature sterilization in water saturated with ozone is described. The sterilizer consists of an ozone generator based on glow barrier dielectric discharge with flat electrodes covered with dielectric operated at a high-voltage power supply of 250 W. The 2.5-L sterilization bath is equipped with a 100-W ultrasound source to provide additional cleaning of complexly shaped objects. High ozone concentrations in water (up to 10 mg/L) are necessary for effective and complete sterilization of tools and is achieved by dissolving ozone in cooled water (∼ 10–15°C). The ozone concentration at the output of the ozone generator is 25 mg/L. The main characteristics of the ozone sterilizer with ultrasonic cavitation are given, and the effectiveness of this sterilizer in inactivating a number of microbiological objects is shown. © 2021 by Begell House, Inc. www.begellhouse.com.
引用
收藏
页码:55 / 61
页数:6
相关论文
共 50 条
  • [1] DEVELOPMENT OF MICROPROCESSOR BASED CONTROL SYSTEM FOR LOW-TEMPERATURE PLASMA STERILIZER WITH ULTRASONIC CAVITATION
    Opaleva, G. P.
    Garkusha, I. E.
    Taran, A. V.
    Gubarev, S. P.
    Zolototrubova, M. I.
    Makhlai, V. A.
    Vorontsov, P. M.
    Gnidenko, Yu. P.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2023, (06): : 141 - 144
  • [2] LOW-TEMPERATURE OZONE STERILIZER BASED ON REACTOR WITH ELECTROLITYC CELL
    Lozina, A. S.
    Taran, V. S.
    Krasnyj, V. V.
    Taran, A. V.
    Chechelnitskyi, O. G.
    Gnidenko, Yu. P.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2019, (01): : 149 - 151
  • [3] DEVELOPMENT AND OPTIMIZATION OF OZONE DESTRUCTOR FOR LOW-TEMPERATURE PLASMA STERILIZER
    Lozina, A. S.
    Garkusha, I. E.
    Taran, A. V.
    Makhlai, V. A.
    Pavlichenko, R. O.
    Chechelnitskij, O. G.
    Gnidenko, Yu. P.
    Vorontsov, P. M.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2024, (02): : 125 - 128
  • [4] Atmospheric Pressure DBD Low-Temperature Plasma Reactor for the Treatment of Sugarcane Bagasse
    Spyrou, Nicolas
    de Amorim, Jayr
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2019, 47 (03) : 1583 - 1592
  • [5] Toward Efficient Low-Temperature Ozone Gas Sterilization of Medical Devices
    Thill, Sandy A.
    Spaltenstein, Marc
    OZONE-SCIENCE & ENGINEERING, 2020, 42 (05) : 386 - 398
  • [6] Low-temperature ozone treatment for organic template removal from zeolite membrane
    Heng, S
    Lau, PPS
    Yeung, KL
    Djafer, M
    Schrotter, JC
    JOURNAL OF MEMBRANE SCIENCE, 2004, 243 (1-2) : 69 - 78
  • [7] Low-temperature ozone treatment for carbon nanotube template removal: improving the template-based ALD method
    Dominguez, D.
    Romo-Herrera, J. M.
    Solorio, F.
    Borbon-Nunez, H. A.
    Landeros, M.
    Diaz de Leon, J. N.
    Contreras, E.
    Contreras, O. E.
    Olivas, A.
    Reynoso-Soto, E. A.
    Tiznado, H.
    Soto, G.
    JOURNAL OF NANOPARTICLE RESEARCH, 2018, 20 (09)
  • [8] Low-temperature ozone treatment for carbon nanotube template removal: improving the template-based ALD method
    D. Dominguez
    J. M. Romo-Herrera
    F. Solorio
    H. A. Borbón-Núñez
    M. Landeros
    J. N. Díaz de León
    E. Contreras
    O. E. Contreras
    A. Olivas
    E. A. Reynoso-Soto
    H. Tiznado
    G. Soto
    Journal of Nanoparticle Research, 2018, 20
  • [9] Low-Temperature Fabrication of Millimeter-Scale MEMS-Based Piezoelectric Ultrasonic Energy Harvesters for Medical Implants
    Tian, Xu
    Iordanidis, Theocharis Nikiforos
    Stemme, Goran
    Roxhed, Niclas
    JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2024, 33 (05) : 524 - 531
  • [10] An Improved Surface Treatment Process of 304 Stainless Steel Based on Low-Temperature Chromizing and Ultrasonic Vibration Extrusion
    Cao, Yansheng
    Zheng, Lianyu
    Fan, Wei
    APPLIED SCIENCES-BASEL, 2022, 12 (22):