Multifunctional dbd-based ozone sterilizer with ultrasonic cavitation for low-temperature treatment of medical tools

被引:0
|
作者
Lozina A.S. [1 ]
Garkusha I.E. [1 ,2 ]
Shypilov S.A. [3 ]
Vorontsov P.M. [4 ]
Bolduriev I.N. [5 ]
Gnidenko Y.P. [2 ]
Taran A.V. [1 ]
Chechelnitskij O.G. [1 ]
机构
[1] National Science Center, Kharkiv Institute of Physics and Technology (NSC KIPT), Institute of Plasma Physics, Kharkiv
[2] V.N. Karazin Kharkiv National University, Kharkiv
[3] Military Medical Clinical Center of the Northern Region of the Medical Forces of the Armed Forces of Ukraine, Kharkiv
[4] Sytenko Institute of Spine and Joint Pathology, NAMS, Kharkiv
[5] Hartron-Plant Ltd, Kharkiv
关键词
Bacteria; Cleaning; COVID-19; Dielectric barrier discharge; Ozone concentration; Ozone sterilization;
D O I
10.1615/PlasmaMed.2021039629
中图分类号
学科分类号
摘要
The development of a dielectric barrier discharge (DBD) sterilizer for cleaning, disinfection, and low-temperature sterilization in water saturated with ozone is described. The sterilizer consists of an ozone generator based on glow barrier dielectric discharge with flat electrodes covered with dielectric operated at a high-voltage power supply of 250 W. The 2.5-L sterilization bath is equipped with a 100-W ultrasound source to provide additional cleaning of complexly shaped objects. High ozone concentrations in water (up to 10 mg/L) are necessary for effective and complete sterilization of tools and is achieved by dissolving ozone in cooled water (∼ 10–15°C). The ozone concentration at the output of the ozone generator is 25 mg/L. The main characteristics of the ozone sterilizer with ultrasonic cavitation are given, and the effectiveness of this sterilizer in inactivating a number of microbiological objects is shown. © 2021 by Begell House, Inc. www.begellhouse.com.
引用
收藏
页码:55 / 61
页数:6
相关论文
共 50 条
  • [21] EFFECT OF LOW-TEMPERATURE ULTRASONIC TREATMENT ON THE PROPERTIES OF STEEL 12KH18N10T
    BIRONT, VS
    SUSHCHIKH, VA
    SIDOROV, FK
    METAL SCIENCE AND HEAT TREATMENT, 1980, 22 (1-2) : 137 - 139
  • [22] EFFECT OF LOW-TEMPERATURE ULTRASONIC TREATMENT ON THE PROPERTIES OF STEEL 12Kh18N10T.
    Biront, V.S.
    Sushchikh, V.A.
    Sidorov, F.K.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka Metallov), 1980, 22 (1-2): : 137 - 139
  • [23] Low-Temperature Hydrothermal Treatment Surface Functionalization of the Ultrafine-Grained TiMo Alloys for Medical Applications
    Piechowiak, Daria
    Miklaszewski, Andrzej
    Jurczyk, Mieczyslaw
    MATERIALS, 2020, 13 (24) : 1 - 17
  • [24] FAST PREPARATION AND APPLICATION OF OMEGA-I-123-HEPTADECANOIC ACID BASED ON A LOW-TEMPERATURE ULTRASONIC SYNTHESIS
    VANRYCKEGHEM, W
    MERTENS, J
    VANDENWINKEL, P
    BOSSUYT, A
    VANDENDRIESSCHE, R
    EUROPEAN JOURNAL OF NUCLEAR MEDICINE, 1983, 8 (05): : A4 - A4
  • [25] Study on the process of knitted woolen fabric treatment based on oxygen low-temperature plasma
    Han, Hao
    Cong, Honglian
    Gao, Zhe
    Zhou, Change
    JOURNAL OF ENGINEERED FIBERS AND FABRICS, 2020, 15 (15):
  • [26] Low-temperature ultraviolet sol-gel photoannealing processing of multifunctional lead-titanate-based thin films
    Calzada M.L.
    Bretos I.
    Jiménez R.
    Guillon H.
    Ricote J.
    Pardo L.
    Journal of Materials Research, 2007, 22 (07) : 1824 - 1833
  • [27] Low-temperature joining of Fe-based amorphous foil with aluminum by ultrasonic-assisted soldering with Sn-based fillers
    Ji, Hongjun
    Li, Long
    Li, Mingyu
    MATERIALS & DESIGN, 2015, 84 : 254 - 260
  • [28] Low-Temperature Molecular Layer Deposition Using Monofunctional Aromatic Precursors and Ozone-Based Ring-Opening Reactions
    Svard, Laura
    Putkonen, Matti
    Kentta, Eija
    Sajavaara, Timo
    Krahl, Fabian
    Karppinen, Maarit
    Van de Kerckhove, Kevin
    Detavernier, Christophe
    Simell, Pekka
    LANGMUIR, 2017, 33 (38) : 9657 - 9665
  • [29] N2O5 Formation Mechanism during the Ozone-Based Low-Temperature Oxidation deNOx Process
    Lin, Fawei
    Wang, Zhihua
    Ma, Qiang
    He, Yong
    Whiddon, Ronald
    Zhu, Yanqun
    Liu, Jianzhong
    ENERGY & FUELS, 2016, 30 (06) : 5101 - 5107
  • [30] Temperature imaging with speed of ultrasonic transmission tomography for medical treatment control: A physical model-based method
    Chu Zhe-Qi
    Yuan Jie
    Pinter, Stephen Z.
    Kripfgans, Oliver D.
    Wang Xue-Ding
    Carson, Paul L.
    Liu Xiao-Jun
    CHINESE PHYSICS B, 2015, 24 (10)