Investigation and Optimization of Process Parameters of Abrasive Water Jet Cutting on C360 Brass Alloy through Design of Experiments

被引：0

作者：

Joel C. ^{[1
]}

Joel L. ^{[2
]}

Athi Sankar P. ^{[3
]}

机构：

[1] Dept. of Mech. Engg, Easwari Engg. College, Tamil Nadu, Chennai

[2] Dept. of Mathematics, SRM Institute of Sci. and Tech, Tamil Nadu, Chennai

[3] Dept. of Mech. Engg, PSNA College of Engg. and Tech, Tamil Nadu, Dindigul

来源：

International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 03期

关键词：

ANOVA; C360 brass alloy; Design of experiments; Material removal rate; Surface roughness;

D O I：

10.4273/ijvss.14.3.21

中图分类号：

学科分类号：

摘要：

Many scientists concentrate on features of water jet cutting by researching various input parameters, abrasive mesh sizes to improve improved processing conditions without the expense. In this work, the treatment of abrasive water jet should be planned to ensure minimal surface roughness and maximum substrate removal. C360 brass alloy is considered to optimize the parameters for cutting including the abrasive feed, stand-off distance and nozzle speeds via the design of experiments supported with response surface methodology. © 2022. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：387 / 390

页数：3

共 50 条

[41] Experimental investigation and optimization of cutting parameters during dry turning process of copper alloy
Tefera A.G.
Sinha D.K.
Gupta G.
Journal of Engineering and Applied Science, 2023, 70 (1):
[42] PROCESS OPTIMIZATION BY APPLYING THE RESPONSE SURFACE METHODOLOGY (RSM) TO THE ABRASIVE SUSPENSION WATER JET CUTTING OF PHENOLIC COMPOSITES
Perec, Andrzej
Radomska-Zalas, Aleksandra
Fajdek-Bieda, Anna
Pude, Frank
FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, 2023, 21 (04) : 575 - 589
[43] INFLUENCE OF THE CHOSEN TECHNICAL AND TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE JET LAGGING DURING THE PROCESS OF NATIVE WOOD CUTTING BY ABRASIVE WATER-JET
Kminiak, Richard
Barcik, Stefan
PROCEEDINGS OF THE 4TH INTERNATIONAL SCIENCE CONFERENCE WOODWORKING TECHNIQUES, 2011, : 153 - 161
[44] Simultaneous optimization of process parameters during abrasive water jet machining on glass fibre reinforced polymer
Dahiya, Anil Kumar
Bhuyan, Basanta Kumar
Acharya, Vikas
Kaushik, Atul Kumar
Kumar, Shailendra
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (07): : 5077 - 5094
[45] Multi-objective optimization of Abrasive water jet Machining parameters for Inconel 625 alloy using TGRA
Rana, Mohit
Akhai, Shalom
MATERIALS TODAY-PROCEEDINGS, 2022, 65 : 3205 - 3210
[46] Experimental Investigation on Surface Topography of the Natural Ceramics in Abrasive Water Jet Cutting and Its Optimization Validation by Formulated Model
Mandal, Vijay
Singh, Amandeep
Yadav, Ganesh Singh
Ramkumar, J.
Agrawal, S.
ADVANCES IN UNCONVENTIONAL MACHINING AND COMPOSITES, AIMTDR 2018, 2020, : 347 - 360
[47] Process Parameter Optimization for Abrasive Water Jet Machining of Titanium Alloy Using Meta-Heuristic Algorithms
Sharma, Vishal S.
Kumar, Amit
Gupta, Munish Kumar
Bhanot, Neeraj
2018 3RD INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING ENGINEERING (ICDME 2018), 2018, 221
[48] Study on Machining Quality in Abrasive Water Jet Machining of Jute-Polymer Composite and Optimization of Process Parameters through Grey Relational Analysis
Murthy, B. R. N.
Beedu, Rajendra
Jayashree, P. K.
Potti, Srinivasa Rao
JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (01):
[49] Controlled Experiment on the Cutting Depth of 7050 Aluminium Alloy Machined by High-pressure Abrasive Water Jet and Process Study
Geng, Xiaoming
Li, Zhen
2016 INTERNATIONAL CONGRESS ON COMPUTATION ALGORITHMS IN ENGINEERING (ICCAE 2016), 2016, : 169 - 174
[50] Water-Jet Assisted Laser Cutting of Korean Pine (Pinus koraiensis): Process and Parameters Optimization
Jiang, Ting
Yang, Chunmei
Yu, Yueqiang
Lou, Yuexuan
Liu, Jiuqing
Ma, Yan
BIORESOURCES, 2020, 15 (02) : 2540 - 2549

← 1 2 3 4 5 →