Investigation and Optimization of Process Parameters of Abrasive Water Jet Cutting on C360 Brass Alloy through Design of Experiments

被引：0
|
作者：
Joel C. [1 ]
Joel L. [2 ]
Athi Sankar P. [3 ]
机构：
[1] Dept. of Mech. Engg, Easwari Engg. College, Tamil Nadu, Chennai
[2] Dept. of Mathematics, SRM Institute of Sci. and Tech, Tamil Nadu, Chennai
[3] Dept. of Mech. Engg, PSNA College of Engg. and Tech, Tamil Nadu, Dindigul
来源：
International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 03期
关键词：
ANOVA; C360 brass alloy; Design of experiments; Material removal rate; Surface roughness;
D O I：
10.4273/ijvss.14.3.21
中图分类号：
学科分类号：
摘要：
Many scientists concentrate on features of water jet cutting by researching various input parameters, abrasive mesh sizes to improve improved processing conditions without the expense. In this work, the treatment of abrasive water jet should be planned to ensure minimal surface roughness and maximum substrate removal. C360 brass alloy is considered to optimize the parameters for cutting including the abrasive feed, stand-off distance and nozzle speeds via the design of experiments supported with response surface methodology. © 2022. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：387 / 390
页数：3
相关论文
共 50 条
  • [11] Optimization of machining parameters in abrasive water jet cutting of stainless steel 304
    Karthik, K.
    Sundarsingh, David Smith
    Harivignesh, M.
    Karthick, R. Gopi
    Praveen, M.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 1384 - 1389
  • [12] A hybrid approach for selection of optimal process parameters in abrasive water jet cutting
    Chakravarthy, PS
    Bahu, NR
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2000, 214 (09) : 781 - 791
  • [13] A new approach for selection of optimal process parameters in abrasive water jet cutting
    Chakravarthy, PS
    Babu, NR
    MATERIALS AND MANUFACTURING PROCESSES, 1999, 14 (04) : 581 - 600
  • [14] ANALYSIS AND MODELING OF THE EFFECTS OF PROCESS PARAMETERS ON SPECIFIC CUTTING ENERGY IN ABRASIVE WATER JET CUTTING
    Jankovic, Predrag Lj.
    Madic, Milos J.
    Petkovic, Dusan Lj.
    Radovanovic, Miroslav R.
    THERMAL SCIENCE, 2018, 22 : S1459 - S1470
  • [15] Optimization of Cutting Process of Medium Density Fibreboards by the Abrasive Water-Jet
    Barcik, Stefan
    Kvietkova, Monika
    Kminiak, Richard
    Alac, Patrik
    DRVNA INDUSTRIJA, 2011, 62 (04) : 263 - 268
  • [16] EXPERIMENTAL INVESTIGATION OF THE SURFACE PROPERTIES OBTAINED BY CUTTING BRASS-353 (α+β) WITH AN ABRASIVE WATER JET AND OTHER CUTTING METHODS
    Akkurt, Adnan
    MATERIALI IN TEHNOLOGIJE, 2014, 48 (05): : 725 - 734
  • [17] Optimization of Process Parameters in Abrasive Water Jet Machining/Cutting (AWJM) of Nickel Alloy using Traditional Analysis to Minimize Kerf Taper Angle
    Jeykrishnan, J.
    Ramnath, B. Vijaya
    Vignesh, S. Sree
    Sridharan, P.
    Saravanan, B.
    MATERIALS TODAY-PROCEEDINGS, 2019, 16 : 392 - 397
  • [18] Investigation of multiple process parameters in abrasive water jet machining of tiles
    Babu, M. Naresh
    Muthukrishnan, N.
    JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2015, 38 (06) : 692 - 700
  • [19] Abrasive suspension water jet cutting optimization using orthogonal array design
    Perec, Andrzej
    INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016, 2016, 149 : 366 - 373
  • [20] Optimization of Machining Parameters to Improve Surface Quality in the Abrasive Water Jet Cutting of AA6351 Aluminium Alloy
    Alexpandian S.
    Rajesh M.
    Loganathan P.
    Hariram V.
    Kishore Y.R.
    Bhaskar A.
    Krishnakumari A.
    Roy E.
    International Journal of Vehicle Structures and Systems, 2023, 15 (04) : 547 - 551
12345