Investigation and Optimization of Process Parameters of Abrasive Water Jet Cutting on C360 Brass Alloy through Design of Experiments

被引：0
|
作者：
Joel C. [1 ]
Joel L. [2 ]
Athi Sankar P. [3 ]
机构：
[1] Dept. of Mech. Engg, Easwari Engg. College, Tamil Nadu, Chennai
[2] Dept. of Mathematics, SRM Institute of Sci. and Tech, Tamil Nadu, Chennai
[3] Dept. of Mech. Engg, PSNA College of Engg. and Tech, Tamil Nadu, Dindigul
来源：
International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 03期
关键词：
ANOVA; C360 brass alloy; Design of experiments; Material removal rate; Surface roughness;
D O I：
10.4273/ijvss.14.3.21
中图分类号：
学科分类号：
摘要：
Many scientists concentrate on features of water jet cutting by researching various input parameters, abrasive mesh sizes to improve improved processing conditions without the expense. In this work, the treatment of abrasive water jet should be planned to ensure minimal surface roughness and maximum substrate removal. C360 brass alloy is considered to optimize the parameters for cutting including the abrasive feed, stand-off distance and nozzle speeds via the design of experiments supported with response surface methodology. © 2022. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：387 / 390
页数：3
相关论文
共 50 条
  • [1] Parametric optimization of abrasive water jet machining of C360 brass using MOTLBO
    Joel, C.
    Joel, Linda
    Muthukumaran, S.
    Shanthini, P. Matilda
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 1905 - 1910
  • [2] Optimization of abrasive water jet machining process parameters of Al 7071 using design of experiments
    Gowthama, K.
    Somashekar, H. M.
    Suresha, B.
    Rajole, Sangamesh
    Ravindran, N.
    MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 2102 - 2108
  • [3] Optimization of working parameters in case of aluminium alloy abrasive water jet cutting (AWJC)
    Schnakovszky, C.
    Herghelegiu, E.
    Radu, M. C.
    Chirita, B. A.
    Tampu, N. C.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
  • [4] PARAMETRIC INVESTIGATION OF ABRASIVE WATER JET CUTTING OF TITANIUM ALLOY
    Mahmood, Khalid
    PROCEEDINGS OF ASME 2024 19TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, MSEC2024, VOL 2, 2024,
  • [5] Multiresponse Optimization of Abrasive Water Jet Cutting Process Parameters Using TOPSIS Approach
    Yuvaraj, N.
    Kumar, M. Pradeep
    MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (07) : 882 - 889
  • [6] Application of crow search algorithm for the optimization of abrasive water jet cutting process parameters
    Tamilarasan, A.
    Renugambal, A.
    Manikanta, D.
    Reddy, G. B. C. Sekhar
    Sravankumar, K.
    Sreekar, B.
    Prasadreddy, G. V.
    3RD INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING 2018, 2018, 390
  • [7] Investigation of abrasive water jet cutting parameters influence on 6082 aluminium alloy surface roughness
    Gyliene, V.
    Jurenas, V.
    Krasauskas, P.
    MECHANIKA, 2014, (06): : 602 - 606
  • [8] Optimization of Abrasive Water Jet Machining Parameters for α-β brass using Taguchi Methodology
    Marichamy, S.
    Ravichandran, M.
    Stalin, B.
    Babu, B. Sridhar
    FME TRANSACTIONS, 2019, 47 (01): : 116 - 121
  • [9] Investigation of process parameters influence in abrasive water jet cutting of D2 steel
    Yuvaraj, Natarajan
    Kumar, Murugasen Pradeep
    MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (02) : 151 - 161
  • [10] Experimental study on optimization of abrasive water jet process parameters
    Pan, Yue
    Yuan, Hao
    Pei, Kangchao
    Zhai, Shengyu
    Geng, Zhongcheng
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (04):
12345