Controlling the nanoparticle size and shape of a Pt/TiO2 catalyst for enhanced hydrogenation of furfural to furfuryl alcohol

被引:0
|
作者
Alsharif, Heba [1 ,2 ]
Conway, Matthew B. [1 ]
Morgan, David J. [1 ]
Davies, Thomas E. [1 ]
Taylor, Stuart H. [1 ]
Sankar, Meenakshisundaram [1 ]
机构
[1] Cardiff Univ, Cardiff Catalysis Inst, Sch Chem, Translat Res Hub, Cardiff CF24 4HQ, Wales
[2] Taibah Univ, Fac Sci, Chem Dept, Al Madinah Al Munawarah 41477, Saudi Arabia
来源
RSC SUSTAINABILITY | 2024年 / 2卷 / 12期
基金
英国工程与自然科学研究理事会;
关键词
SELECTIVE HYDROGENATION; 2-METHYLFURAN;
D O I
10.1039/d4su00388h
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
We report the selective liquid phase hydrogenation of furfural to 2-furfuryl alcohol using a Pt/TiO2 catalyst prepared by the wet-impregnation method under mild reaction conditions (30 degrees C and 3 bar H-2 pressure). The effect of heat treatment protocols on the catalyst structures and the resultant catalytic properties of 4.2%Pt/TiO2 and 0.6%Pt/TiO2 was investigated. For both Pt loadings, the calcined + reduced catalyst exhibited higher activity compared to the reduced only catalyst, with the difference in activity being more pronounced for 4.2%Pt/TiO2 than for 0.6%Pt/TiO2. For the 4.2%Pt/TiO2 catalyst, the reduced-only sample achieved 25% conversion with 90% selectivity for 2-furfuryl alcohol after 6 hours, while the calcined + reduced sample reached 99% conversion with 59% selectivity under identical reaction conditions. For the 0.6%Pt/TiO2 catalyst, the reduced-only sample showed 70% conversion with 96% selectivity for 2-furfuryl alcohol, whereas the calcined + reduced sample achieved 97% conversion and 95% selectivity after a 2-h reaction. Characterisation of the samples using X-ray photoelectron spectroscopy, CO chemisorption and scanning transmission electron microscopy revealed that direct high temperature reduction resulted in a mixture of large Pt particles (>5 nm) with irregular shapes, small Pt nanoparticles (ca. 2 nm) and some sub-nm clusters. In contrast, calcination + reduction produced uniformly distributed Pt nanoparticles (ca. 2 nm) for both Pt loadings. Despite the presence of strong metal support interaction (SMSI) in Pt/TiO2 catalysts, no spectroscopic evidence for such a strong interaction was found in this study. Therefore, the observed difference in catalytic activity is attributed to the variations in the shapes and sizes of the Pt nanoparticles. During the synthesis of Pt/TiO2 catalysts, the calcination + reduction activation procedure is more beneficial for enhancing both activity and selectivity compared to a reduction only procedure.
引用
收藏
页码:3888 / 3896
页数:9
相关论文
共 50 条
  • [31] Copper-containing MCM-48 catalyst for the selective hydrogenation of furfural to furfuryl alcohol
    Hao, XY
    Zhou, W
    Wang, JW
    Guan, NJ
    Liu, SX
    CHINESE JOURNAL OF CATALYSIS, 2005, 26 (11) : 935 - 937
  • [32] Efficient furfural hydrogenation to furfuryl alcohol using a PtCo bimetallic catalyst in a fluidized electrocatalysis system
    Li, Liangli
    Yang, Mingzhu
    Cheng, Long
    Shi, Jingjing
    Gou, Jinsheng
    Xu, Junming
    REACTION CHEMISTRY & ENGINEERING, 2023, 8 (11) : 2796 - 2803
  • [33] Kinetics of hydrogenation of furfural to furfuryl alcohol over copper chromite catalyst and optimum regeneration procedures
    Soner, E
    Dogu, T
    Yorulmaz, Y
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 1996, 21 (02): : 321 - 332
  • [34] Selective Hydrogenation of Furfural to Furfuryl Alcohol in the Presence of a Recyclable Cobalt/SBA-15 Catalyst
    Audemar, Maite
    Ciotonea, Carmen
    Vigier, Karine De Oliveira
    Royer, Sebastien
    Ungureanu, Adrian
    Dragoi, Brindusa
    Dumitriu, Emil
    Jerome, Francois
    CHEMSUSCHEM, 2015, 8 (11) : 1885 - 1891
  • [35] High Efficiency Catalytic Transfer Hydrogenation of Furfural to Furfuryl Alcohol Over Metallic Oxide Catalyst
    Liu, Zonghui
    Zhang, Zhongze
    Wen, Zhe
    Xue, Bing
    CATALYSIS LETTERS, 2022, 152 (12) : 3537 - 3547
  • [36] Highly Dispersed CoFe Catalyst for Selective Hydrogenation of Biomass-Derived Furfural to Furfuryl Alcohol
    Sun, Lixia
    Zhao, Ying
    Gao, Zhuoyou
    Yue, Xiaokang
    Gao, Shutao
    Gao, Wei
    Cheng, Xiang
    Shang, Ningzhao
    Wang, Chun
    ENERGY TECHNOLOGY, 2022, 10 (02)
  • [37] High Efficiency Catalytic Transfer Hydrogenation of Furfural to Furfuryl Alcohol Over Metallic Oxide Catalyst
    Zonghui Liu
    Zhongze Zhang
    Zhe Wen
    Bing Xue
    Catalysis Letters, 2022, 152 : 3537 - 3547
  • [38] Enhanced catalytic performance of Cu/NC catalyst for hydrogenation of furfural to furfuryl alcohol: Effective stabilization of Cu+ with CaO promoter
    Liu, Junwei
    Li, Bingwen
    Tian, Huiyu
    Zhao, Jinxian
    FUEL, 2025, 390
  • [39] Tuning the Ni/TiO2 catalyst structure during preparation for the selective hydrogenation of furfural
    Zhang, Jinxin
    Mao, Donglei
    Zhang, Heng
    Wu, Dongfang
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2024, 162
  • [40] Selective hydrogenation of furfural to furfuryl alcohol in water under mild conditions over a hydrotalcite-derived Pt-based catalyst
    Gao, Ge
    Remon, Javier
    Jiang, Zhicheng
    Yao, Lu
    Hu, Changwei
    APPLIED CATALYSIS B-ENVIRONMENT AND ENERGY, 2022, 309