Controlling the nanoparticle size and shape of a Pt/TiO2 catalyst for enhanced hydrogenation of furfural to furfuryl alcohol

被引:0
|
作者
Alsharif, Heba [1 ,2 ]
Conway, Matthew B. [1 ]
Morgan, David J. [1 ]
Davies, Thomas E. [1 ]
Taylor, Stuart H. [1 ]
Sankar, Meenakshisundaram [1 ]
机构
[1] Cardiff Univ, Cardiff Catalysis Inst, Sch Chem, Translat Res Hub, Cardiff CF24 4HQ, Wales
[2] Taibah Univ, Fac Sci, Chem Dept, Al Madinah Al Munawarah 41477, Saudi Arabia
来源
RSC SUSTAINABILITY | 2024年 / 2卷 / 12期
基金
英国工程与自然科学研究理事会;
关键词
SELECTIVE HYDROGENATION; 2-METHYLFURAN;
D O I
10.1039/d4su00388h
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
We report the selective liquid phase hydrogenation of furfural to 2-furfuryl alcohol using a Pt/TiO2 catalyst prepared by the wet-impregnation method under mild reaction conditions (30 degrees C and 3 bar H-2 pressure). The effect of heat treatment protocols on the catalyst structures and the resultant catalytic properties of 4.2%Pt/TiO2 and 0.6%Pt/TiO2 was investigated. For both Pt loadings, the calcined + reduced catalyst exhibited higher activity compared to the reduced only catalyst, with the difference in activity being more pronounced for 4.2%Pt/TiO2 than for 0.6%Pt/TiO2. For the 4.2%Pt/TiO2 catalyst, the reduced-only sample achieved 25% conversion with 90% selectivity for 2-furfuryl alcohol after 6 hours, while the calcined + reduced sample reached 99% conversion with 59% selectivity under identical reaction conditions. For the 0.6%Pt/TiO2 catalyst, the reduced-only sample showed 70% conversion with 96% selectivity for 2-furfuryl alcohol, whereas the calcined + reduced sample achieved 97% conversion and 95% selectivity after a 2-h reaction. Characterisation of the samples using X-ray photoelectron spectroscopy, CO chemisorption and scanning transmission electron microscopy revealed that direct high temperature reduction resulted in a mixture of large Pt particles (>5 nm) with irregular shapes, small Pt nanoparticles (ca. 2 nm) and some sub-nm clusters. In contrast, calcination + reduction produced uniformly distributed Pt nanoparticles (ca. 2 nm) for both Pt loadings. Despite the presence of strong metal support interaction (SMSI) in Pt/TiO2 catalysts, no spectroscopic evidence for such a strong interaction was found in this study. Therefore, the observed difference in catalytic activity is attributed to the variations in the shapes and sizes of the Pt nanoparticles. During the synthesis of Pt/TiO2 catalysts, the calcination + reduction activation procedure is more beneficial for enhancing both activity and selectivity compared to a reduction only procedure.
引用
收藏
页码:3888 / 3896
页数:9
相关论文
共 50 条
  • [21] Deactivation mechanism of Cu/SiO2 catalyst in gas phase hydrogenation of furfural to furfuryl alcohol
    Yu D.-D.
    Yu X.-R.
    Zhang Y.-J.
    Wang K.-J.
    Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 2023, 51 : 1752 - 1760
  • [22] Selective hydrogenation of furfural to furfuryl alcohol over copper-cobalt bimetallic catalyst
    Zhang, Jingyun
    Liu, Yumeng
    Jia, Zhen
    Yu, Shitao
    Liu, Shiwei
    Li, Lu
    Wu, Qiong
    Yu, Hailong
    Liu, Yuxiang
    Jiang, Xiaoqing
    Liu, Yue
    Xu, Chao
    CHEMICAL ENGINEERING JOURNAL, 2024, 490
  • [23] Controlling the Production of Acid Catalyzed Products of Furfural Hydrogenation by Pd/TiO2
    Tierney, George F.
    Alijani, Shahram
    Panchal, Monik
    Decarolis, Donato
    de Gutierrez, Martha Briceno
    Mohammed, Khaled M. H.
    Callison, June
    Gibson, Emma K.
    Thompson, Paul B. J.
    Collier, Paul
    Dimitratos, Nikolaos
    Corbos, E. Crina
    Pelletier, Frederic
    Villa, Alberto
    Wells, Peter P.
    CHEMCATCHEM, 2021, 13 (24) : 5121 - 5133
  • [24] A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol
    Nagaraja, BM
    Kumar, VS
    Shasikala, V
    Padmasri, AH
    Sreedhar, B
    Raju, BD
    Rao, KSR
    CATALYSIS COMMUNICATIONS, 2003, 4 (06) : 287 - 293
  • [25] The influence of metal selection on catalyst activity for the liquid phase hydrogenation of furfural to furfuryl alcohol
    O'Driscoll, A.
    Leahy, J. J.
    Curtin, T.
    CATALYSIS TODAY, 2017, 279 : 194 - 201
  • [26] Hydrogenation and Hydrolysis of Furfural to Furfuryl Alcohol, Cyclopentanone, and Cyclopentanol with a Heterogeneous Copper Catalyst in Water
    Zhou, Xuyang
    Feng, Zhipeng
    Guo, Wanwan
    Liu, Junmei
    Li, Ruyue
    Chen, Rizhi
    Huang, Jun
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2019, 58 (10) : 3988 - 3993
  • [27] Bimetallic PtSn catalyst for the selective hydrogenation of furfural to furfuryl alcohol in liquid-phase
    Merlo, Andrea B.
    Vetere, Virginia
    Ruggera, Jose F.
    Casella, Monica L.
    CATALYSIS COMMUNICATIONS, 2009, 10 (13) : 1665 - 1669
  • [28] Kinetics of benzene and toluene hydrogenation on a Pt/TiO2 catalyst
    Kazantsev, RV
    Gaidai, NA
    Nekrasov, NV
    Tenchev, K
    Petrov, L
    Lapidus, AL
    KINETICS AND CATALYSIS, 2003, 44 (04) : 529 - 535
  • [29] Kinetics of Benzene and Toluene Hydrogenation on a Pt/TiO2 Catalyst
    R. V. Kazantsev
    N. A. Gaidai
    N. V. Nekrasov
    K. Tenchev
    L. Petrov
    A. L. Lapidus
    Kinetics and Catalysis, 2003, 44 : 529 - 535
  • [30] An Investigation of the Effect of the Addition of Tin to 5%Pd/TiO2 for the Hydrogenation of Furfuryl Alcohol
    King, Gavin M.
    Iqbal, Sarwat
    Miedziak, Peter J.
    Brett, Gemma L.
    Kondrat, Simon A.
    Yeo, Benjamin R.
    Liu, Xi
    Edwards, Jennifer K.
    Morgan, David J.
    Knight, David K.
    Hutchings, Graham J.
    CHEMCATCHEM, 2015, 7 (14) : 2122 - 2129