Dual-phase coexistence enables to alleviate resistance drift in phase-change films

被引:0
|
作者
Wu, Tong [1 ]
Chen, Chen [1 ]
Zhu, Jinyi [1 ]
Wang, Guoxiang [1 ,2 ]
Dai, Shixun [1 ,2 ]
机构
[1] Ningbo Univ, Res Inst Adv Technol, Lab Infrared Mat & Devices, Ningbo 315211, Peoples R China
[2] Ningbo Univ, Inst Ocean Engn, Ningbo 315211, Peoples R China
基金
中国国家自然科学基金;
关键词
phase change films; X-ray methods; resistance drift; optical band gap; CHANGE MEMORY;
D O I
10.1088/1674-4926/24040013
中图分类号
O469 [凝聚态物理学];
学科分类号
070205 ;
摘要
The amorphous phase-change materials with spontaneous structural relaxation leads to the resistance drift with the time for phase-change neuron synaptic devices. Here, we modify the phase change properties of the conventional Ge2Sb2Te5 (GST) material by introducing an SnS phase. It is found that the resistance drift coefficient of SnS-doped GST was decreased from 0.06 to 0.01. It can be proposed that the origin originates from the precipitation of GST nanocrystals accompanied by the precipitation of SnS crystals compared to single-phase GST compound systems. We also found that the decrease in resistance drift can be attributed to the narrowed bandgap from 0.65 to 0.43 eV after SnS-doping. Thus, this study reveals the quantitative relationship between the resistance drift and the band gap and proposes a new idea for alleviating the resistance drift by composition optimization, which is of great significance for finding a promising phase change material.
引用
收藏
页数:5
相关论文
共 50 条
  • [21] Time dependent resistance change of amorphous phase in phase-change nonvolatile memories
    Yoon, Sung-Min
    Choi, Kyu-Jeong
    Lee, Nam-Yeal
    Lee, Seung-Yun
    Park, Young-Sam
    Yu, Byoung-Gon
    Park, Tae-Jin
    Choi, Se-Young
    INTEGRATED FERROELECTRICS, 2007, 93 : 83 - 89
  • [22] Interface-controlled growth-dominated crystallization enables ultralow resistance drift in GeTe/Sb2Te3 phase-change heterostructure thin films
    Wu, Tong
    Wang, Guoxiang
    Lotnyk, Andriy
    He, Anyi
    Shen, Xiang
    Chen, Yimin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 995
  • [23] Wearing Comfort of temperature-adaptable textiles by dual-phase coatings between phase-change materials and silicon carbide particles
    Park, Youngmi
    Kim, Eunae
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 126 : E151 - E158
  • [24] The Influence of Sputtering Power on Phase-Change Films
    Zhang, Lei
    Gu, Lixin
    Han, Xiaodong
    Huang, Huan
    Dai, Yanan
    Cheng, Yan
    Wang, Yang
    Zhang, Ze
    Wu, Yiqun
    Liu, Bo
    Song, Zhitang
    ELECTROCHEMICAL AND SOLID STATE LETTERS, 2012, 15 (06) : H205 - H207
  • [25] SPICE modeling of phase-change resistance in PCM
    Hong Yang
    Lin Yinyin
    Tang Tingao
    Chen Bomy
    INTEGRATED FERROELECTRICS, 2006, 78 (01) : 19 - 26
  • [26] Exploiting Resistance Drift Characteristics to Improve Reliability of LDPC-Assisted Phase-Change Memory
    Zhang, Meng
    Wu, Fei
    Yu, Qin
    Liu, Weihua
    Ma, Ruixiang
    Xie, Changsheng
    IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY, 2021, 21 (03) : 324 - 330
  • [27] Drift-Invariant Detection for Multilevel Phase-Change Memory
    Stanisavljevic, Milos
    Mittelholzer, Thomas
    Papandreou, Nikolaos
    Parnell, Thomas
    Pozidis, Haralampos
    2018 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS), 2018,
  • [28] Phase-Change Random Access Memory With Multilevel Resistances Implemented Using a Dual Phase-Change Material Stack
    Gyanathan, Ashvini
    Yeo, Yee-Chia
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 2012, 59 (11) : 2910 - 2916
  • [29] Structural change with the resistance drift phenomenon in amorphous GeTe phase change materials' thin films
    Noe, Pierre
    Sabbione, Chiara
    Castellani, Niccolo
    Veux, Guillaume
    Navarro, Gabriele
    Sousa, Veronique
    Hippert, Francoise
    d'Acapito, Francesco
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2016, 49 (03)
  • [30] AC or DC for resistance welding dual-phase 600?
    Hofman, K
    Soter, M
    Orsette, C
    Villaire, S
    Prokator, M
    WELDING JOURNAL, 2005, 84 (01) : 46 - 48