Notch Orientation and Fatigue Strength of As-built L-PBF AlSi10Mg

被引：2

作者：

Konecna, Radomila ^{[1
]}

Nicoletto, Gianni ^{[2
]}

Kunz, Ludvik ^{[3
]}

Jambor, Michal ^{[3
]}

机构：

[1] Univ Zilina, Dept Mat Engn, Univ Zitna 8215-1, Zilina 01026, Slovakia

[2] Univ Parma, Dept Engn & Architecture, Via Univ 12-1, I-43121 Parma, Italy

[3] Czech Acad Sci Brno, Inst Phys Mat, Zizkova 22, Brno 61662, Czech Republic

来源：

23 EUROPEAN CONFERENCE ON FRACTURE, ECF23 | 2022年 / 42卷

关键词：

Fatigue notch sensitivity; surface quality; L-PBF; AlSi10Mg; MICROSTRUCTURE;

D O I：

10.1016/j.prostr.2022.12.108

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fatigue life of AlSi10Mg specimens with semi-circular notch manufactured by Laser Powder Bed Fusion was experimentally determined. The fatigue life in the high cycle fatigue region is strongly influenced by the microstructure, the as-built surface quality of the notch root, both of which depend on the notch orientation with respect to the build direction and by residual stresses. (c) 2022 The Authors. Published by Elsevier B.V.

引用

页码：857 / 862

页数：6

共 50 条

[41] Static assessment of flawed notched components manufactured by L-PBF in AlSi10Mg: Experiments, computational approaches, a simplified method
Minervaa, G.
Pozzoni, I.
Zarei, F.
Beretta, S.
ENGINEERING FRACTURE MECHANICS, 2024, 308
[42] Influence of post-processing and build orientation on the micro-machinability and chip formation during micro-drilling of L-PBF AlSi10Mg
Joshy, Jino
Kuriachen, Basil
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2023, 45 : 35 - 48
[43] An experimental investigation of the influence of SLM input factors on the as-built AlSi10Mg surface quality
Igwe, Nnamdi Chukwunenye
Akhrif, Iatimad
El Jai, Mostapha
El Fahime, Benaissa
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 136 (02): : 619 - 674
[44] Improving the Defect Tolerance and Fatigue Strength of AM AlSi10Mg
Lehner, Patrick
Blinn, Bastian
Beck, Tilmann
ADVANCED ENGINEERING MATERIALS, 2023, 25 (15)
[45] Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
du Plessis, A.
Beretta, S.
ADDITIVE MANUFACTURING, 2020, 35
[46] Study on Mechanical Properties and Corrosion Behaviour of Graphene-Reinforced AlSi10Mg Composite Manufactured by Additively L-PBF Technique
Patidar, Sunil
Mishra, Srinibash
Ashiq, Mohammad
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
[47] Comparative tribological studies of additive manufactured as-built and chemically polished AlSi10Mg alloy surfaces
Srinivas, Ms
Pandey, D.
Prasad, Ts
Purushothaman, S.
Sankar, M. r
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2024,
[48] Nondestructive Assessment of Quality Characteristics of As-Built Additive Manufacturing Aeronautical AlSi10Mg and Inspection of Offset
Ding, Pengcheng
Zeng, Zhiwei
3D PRINTING AND ADDITIVE MANUFACTURING, 2024, 11 (02) : e851 - e859
[49] Investigation on the fatigue strength of AlSi10Mg fabricated by PBF-LB/M and subjected to low temperature heat treatments
Roveda, Ilaria
Serrano-Munoz, Itziar
Haubrich, Jan
Requena, Guillermo
Madia, Mauro
MATERIALS & DESIGN, 2024, 244
[50] Enhancing the properties of friction stir welded joints of L-PBF printed AlSi10Mg alloy via multi-variable optimization
Minhas, Navdeep
Sharma, Varun
Bhadauria, Shailendra Singh
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2023, 23 (01)

← 1 2 3 4 5 →