Notch Orientation and Fatigue Strength of As-built L-PBF AlSi10Mg

被引：2
|
作者：
Konecna, Radomila [1 ]
Nicoletto, Gianni [2 ]
Kunz, Ludvik [3 ]
Jambor, Michal [3 ]
机构：
[1] Univ Zilina, Dept Mat Engn, Univ Zitna 8215-1, Zilina 01026, Slovakia
[2] Univ Parma, Dept Engn & Architecture, Via Univ 12-1, I-43121 Parma, Italy
[3] Czech Acad Sci Brno, Inst Phys Mat, Zizkova 22, Brno 61662, Czech Republic
来源：
23 EUROPEAN CONFERENCE ON FRACTURE, ECF23 | 2022年 / 42卷
关键词：
Fatigue notch sensitivity; surface quality; L-PBF; AlSi10Mg; MICROSTRUCTURE;
D O I：
10.1016/j.prostr.2022.12.108
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fatigue life of AlSi10Mg specimens with semi-circular notch manufactured by Laser Powder Bed Fusion was experimentally determined. The fatigue life in the high cycle fatigue region is strongly influenced by the microstructure, the as-built surface quality of the notch root, both of which depend on the notch orientation with respect to the build direction and by residual stresses. (c) 2022 The Authors. Published by Elsevier B.V.
引用
收藏
页码：857 / 862
页数：6
相关论文
共 50 条
  • [21] Fatigue life of laser powder bed fusion (L-PBF) AlSi10Mg alloy: effects of surface roughness and porosity
    Afroz, L.
    Qian, M.
    Forsmark, J.
    Li, Y.
    Easton, M.
    Das, R.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (04) : 2423 - 2441
  • [22] Effect of surface roughness on rotating fatigue strength of as-built AlSi10Mg produced by laser powder bed fusion
    El Hassanin, Andrea
    Prisco, Umberto
    WELDING IN THE WORLD, 2025, 69 (04) : 1123 - 1133
  • [23] Effect of surface roughness on rotating fatigue strength of as-built AlSi10Mg produced by laser powder bed fusion
    Andrea El Hassanin
    Umberto Prisco
    Welding in the World, 2025, 69 (4) : 1123 - 1133
  • [24] Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg
    Stransky, Ondrej
    Beranek, Libor
    Pathak, Sunil
    Smaus, Jan
    Kopecek, Jaromir
    Kaufman, Jan
    Bohm, Marek
    Brajer, Jan
    Mocek, Tomas
    Holesovsky, Frantisek
    VIRTUAL AND PHYSICAL PROTOTYPING, 2024, 19 (01)
  • [25] Porosity and microstructure of L-PBF printed AlSi10Mg thin tubes in laser shock peening
    Stransky, Ondrej
    Beranek, Libor
    Pathak, Sunil
    Kaufman, Jan
    Bohm, Marek
    Kopecek, Jaromir
    Holesovsky, Frantisek
    Petrasek, Simon
    Hlavunkova, Lucie
    Soukup, Zbynek
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 1683 - 1695
  • [26] Effect of Surface and Subsurface Defects on Fatigue Behavior of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion (L-PBF)
    Nasab, Milad Hamidi
    Giussani, Alessandro
    Gastaldi, Dario
    Tirelli, Valeria
    Vedani, Maurizio
    METALS, 2019, 9 (10)
  • [27] Analysing the effect of defects on stress concentration and fatigue life of L-PBF AlSi10Mg alloy using finite element modelling
    L. Afroz
    S. B. Inverarity
    M. Qian
    M. Easton
    R. Das
    Progress in Additive Manufacturing, 2024, 9 : 341 - 359
  • [28] Fatigue failure mechanisms for AlSi10Mg manufactured by L-PBF under axial and torsional loads: The role of defects and residual stresses
    Sausto, F.
    Carrion, P. E.
    Shamsaei, N.
    Beretta, S.
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 162
  • [29] Analysing the effect of defects on stress concentration and fatigue life of L-PBF AlSi10Mg alloy using finite element modelling
    Afroz, L.
    Inverarity, S. B.
    Qian, M.
    Easton, M.
    Das, R.
    PROGRESS IN ADDITIVE MANUFACTURING, 2024, 9 (02) : 341 - 359
  • [30] Effect of As-Built and Ground Surfaces on the Fatigue Properties of AlSi10Mg Alloy Produced by Additive Manufacturing
    Domfang Ngnekou, Julius Noel
    Nadot, Yves
    Henaff, Gilbert
    Nicolai, Julien
    Ridosz, Lionel
    METALS, 2021, 11 (09)
12345