Notch Orientation and Fatigue Strength of As-built L-PBF AlSi10Mg

被引：2
|
作者：
Konecna, Radomila [1 ]
Nicoletto, Gianni [2 ]
Kunz, Ludvik [3 ]
Jambor, Michal [3 ]
机构：
[1] Univ Zilina, Dept Mat Engn, Univ Zitna 8215-1, Zilina 01026, Slovakia
[2] Univ Parma, Dept Engn & Architecture, Via Univ 12-1, I-43121 Parma, Italy
[3] Czech Acad Sci Brno, Inst Phys Mat, Zizkova 22, Brno 61662, Czech Republic
来源：
23 EUROPEAN CONFERENCE ON FRACTURE, ECF23 | 2022年 / 42卷
关键词：
Fatigue notch sensitivity; surface quality; L-PBF; AlSi10Mg; MICROSTRUCTURE;
D O I：
10.1016/j.prostr.2022.12.108
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fatigue life of AlSi10Mg specimens with semi-circular notch manufactured by Laser Powder Bed Fusion was experimentally determined. The fatigue life in the high cycle fatigue region is strongly influenced by the microstructure, the as-built surface quality of the notch root, both of which depend on the notch orientation with respect to the build direction and by residual stresses. (c) 2022 The Authors. Published by Elsevier B.V.
引用
收藏
页码：857 / 862
页数：6
相关论文
共 50 条
  • [1] Surface quality and fatigue behavior of L-PBF AlSi10Mg in as-built condition
    Konecna, Radomila
    Uriati, Federico
    Nicoletto, Gianni
    Tibor, Varmus
    SECOND EUROPEAN CONFERENCE ON THE STRUCTURAL INTEGRITY OF ADDITIVELY MANUFACTURED MATERIALS, 2021, 34 : 135 - 140
  • [2] INFLUENCE OF ROUGH AS-BUILT SURFACES ON SMOOTH AND NOTCHED FATIGUE BEHAVIOR OF L-PBF AlSi10Mg
    Nicoletto, Gianni
    ADDITIVE MANUFACTURING, 2020, 34
  • [3] Benchmark of a probabilistic fatigue software based on machined and as-built components manufactured in AlSi10Mg by L-PBF
    Sausto, F.
    Romano, S.
    Patriarca, L.
    Miccoli, S.
    Beretta, S.
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 165
  • [4] A benchmark activity on the fatigue life assessment of AlSi10Mg components manufactured by L-PBF
    Beretta, S.
    Patriarca, L.
    Gargourimotlagh, M.
    Hardaker, A.
    Brackett, D.
    Salimian, M.
    Gumpinger, J.
    Ghidini, T.
    MATERIALS & DESIGN, 2022, 218
  • [5] Corrosion-Fatigue Performance of 3D-Printed (L-PBF) AlSi10Mg
    Linder, Clara
    Vucko, Flavien
    Ma, Taoran
    Proper, Sebastian
    Dartfeldt, Erik
    MATERIALS, 2023, 16 (17)
  • [6] Investigation of residual stresses and microstructure effects on the fatigue behaviour of a L-PBF AlSi10Mg alloy
    Roveda, Ilaria
    Serrano-Munoz, Itziar
    Kromm, Arne
    Madia, Mauro
    9TH EDITION OF THE INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2021, 2022, 38 : 564 - 571
  • [7] Characterization of Asymmetric and Anisotropic Plastic Flow of L-PBF AlSi10Mg
    Ricci, S.
    Zucca, G.
    Iannitti, G.
    Ruggiero, A.
    Sgambetterra, M.
    Rizzi, G.
    Bonora, N.
    Testa, G.
    EXPERIMENTAL MECHANICS, 2023, 63 (08) : 1409 - 1425
  • [8] Characterization of Asymmetric and Anisotropic Plastic Flow of L-PBF AlSi10Mg
    S. Ricci
    G. Zucca
    G. Iannitti
    A. Ruggiero
    M. Sgambetterra
    G. Rizzi
    N. Bonora
    G. Testa
    Experimental Mechanics, 2023, 63 : 1409 - 1425
  • [9] Design, production, and fatigue testing of an optimized structural component made of L-PBF AlSi10Mg
    Uriati, Federico
    Zambrelli, Luca
    Nicoletto, Gianni
    Garibaldi, Michele
    SECOND EUROPEAN CONFERENCE ON THE STRUCTURAL INTEGRITY OF ADDITIVELY MANUFACTURED MATERIALS, 2021, 34 : 184 - 190
  • [10] Helium bubble formation in additive manufactured L-PBF AlSi10Mg
    Landau, P.
    Saffar, T.
    Orion, I.
    Girshevitz, O.
    Tiferet, E.
    JOURNAL OF NUCLEAR MATERIALS, 2023, 582
12345