Research on the EMA Control Method Based on Transmission Error Compensation

被引:0
|
作者
Zhang, Pan [1 ]
Shi, Zhaoyao [1 ]
Yu, Bo [1 ]
Qi, Haijiang [1 ]
机构
[1] Beijing Univ Technol, Beijing Engn Res Ctr Precis Measurement Technol &, 100 Pingleyuan, Beijing 100124, Peoples R China
基金
中国国家自然科学基金;
关键词
permanent magnet synchronous motor; harmonic drive; transmission error compensation; automatic disturbance rejection control; root mean square error; SLIDING MODE CONTROL; HARMONIC DRIVE; ACTIVE-DISTURBANCE; SYSTEM; SPEED; REJECTION; ADRC;
D O I
10.3390/en17112528
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This research investigates the impact of nonlinear clearance factors on position tracking accuracy in the servo drive system of a harmonic reducer. The study introduces a technique for modeling and compensating for transmission errors, thereby improving position tracking accuracy through online compensation combined with an auto-disturbance rejection controller. Initially, the mathematical model of the permanent magnet synchronous motor is outlined, and the current loop and speed loop control models are derived. Subsequently, an electromechanical actuator (EMA) simulation model with clearance is established, and detailed simulation analysis is conducted to verify the impact of clearance on tracking accuracy. A model for online compensation of transmission errors is then developed. Following the principles of active disturbance rejection control (ADRC), a second-order ADRC is formulated for real-time compensation of transmission errors in EMA position mode. Finally, through no-load and load experiments, the change in position tracking error with and without transmission error compensation is compared and analyzed. The results demonstrate that utilizing automatic disturbance rejection control with transmission error compensation achieves the highest position tracking accuracy. Compared to the proportion integration differentiation (PID) control method, the root mean square of position tracking error is reduced by approximately 12.8% and 17.3% under no-load and load conditions, respectively. By compensating for position errors online, the accuracy of the EMA position can be improved.
引用
收藏
页数:17
相关论文
共 50 条
  • [31] An Improved Dehazing Method Based on the Transmission Compensation
    Liu, Haitao
    Guo, Jin
    Sun, Chang-Yin
    PROCEEDINGS OF THE 2016 12TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA), 2016, : 2732 - 2737
  • [32] Fuzzy ADRC method for EMA friction feedforward compensation
    Shi Z.
    Zhang P.
    Lin J.
    Dianji yu Kongzhi Xuebao/Electric Machines and Control, 2023, 27 (12): : 171 - 181and193
  • [33] Research on a Novel Adaptive Compensation Control Method
    Xiao, Hongliang
    Li, Huacong
    Han, Xiaobao
    Jia, Qiusheng
    2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2017, : 709 - 713
  • [34] Compensation of Method Error in the Infrared Heating Control of Circular Saws
    Khviyuzov, M. A.
    Galashev, A. N.
    Soloviev, I. I.
    LESNOY ZHURNAL-FORESTRY JOURNAL, 2015, (06) : 107 - 115
  • [35] Control Method of Motion Error Compensation for NC Machine Tools
    Nagaoka, Kotaro
    International Journal of Automation Technology, 2009, 3 (03) : 292 - 297
  • [36] High-precision Resistance Calibrator Error Compensation Method Research Based on Fitting Algorithm
    Yang, Chunling
    Yu, Jiajian
    Zhu, Min
    PROCEEDINGS OF THE 2017 12TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA), 2017, : 1915 - 1919
  • [37] Error compensation method based on phase of spectrum research in windowed DFT signal harmonic analysis
    Song, LX
    Wang, Q
    Wang, Q
    Wu, HT
    ISTM/2003: 5TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-6, CONFERENCE PROCEEDINGS, 2003, : 715 - 718
  • [38] Research on active supervision and compensation method for angle error of magnetoelectric encoder based on state equation
    Wang L.
    Wu D.
    Li Y.
    Zhang Y.
    Pan W.
    Wang, Lei (leiwang007@126.com), 1600, Science Press (41): : 94 - 105
  • [39] A compensation method of NC data based on contour error
    Zhang Y.
    Liang G.
    Li Y.
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2022, 62 (12): : 1989 - 1995
  • [40] Thermal Error Compensation Method Based on Floyd Algorithm
    Cheng, Qiang
    Sun, Bing-Wei
    Liu, Zhi-Feng
    Li, Wei-Shuo
    Li, Guang-Peng
    Gu, Pei-Hua
    2016 INTERNATIONAL CONFERENCE ON MECHANICS DESIGN, MANUFACTURING AND AUTOMATION (MDM 2016), 2016, : 662 - 671