Research on the EMA Control Method Based on Transmission Error Compensation

被引:0
|
作者
Zhang, Pan [1 ]
Shi, Zhaoyao [1 ]
Yu, Bo [1 ]
Qi, Haijiang [1 ]
机构
[1] Beijing Univ Technol, Beijing Engn Res Ctr Precis Measurement Technol &, 100 Pingleyuan, Beijing 100124, Peoples R China
基金
中国国家自然科学基金;
关键词
permanent magnet synchronous motor; harmonic drive; transmission error compensation; automatic disturbance rejection control; root mean square error; SLIDING MODE CONTROL; HARMONIC DRIVE; ACTIVE-DISTURBANCE; SYSTEM; SPEED; REJECTION; ADRC;
D O I
10.3390/en17112528
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This research investigates the impact of nonlinear clearance factors on position tracking accuracy in the servo drive system of a harmonic reducer. The study introduces a technique for modeling and compensating for transmission errors, thereby improving position tracking accuracy through online compensation combined with an auto-disturbance rejection controller. Initially, the mathematical model of the permanent magnet synchronous motor is outlined, and the current loop and speed loop control models are derived. Subsequently, an electromechanical actuator (EMA) simulation model with clearance is established, and detailed simulation analysis is conducted to verify the impact of clearance on tracking accuracy. A model for online compensation of transmission errors is then developed. Following the principles of active disturbance rejection control (ADRC), a second-order ADRC is formulated for real-time compensation of transmission errors in EMA position mode. Finally, through no-load and load experiments, the change in position tracking error with and without transmission error compensation is compared and analyzed. The results demonstrate that utilizing automatic disturbance rejection control with transmission error compensation achieves the highest position tracking accuracy. Compared to the proportion integration differentiation (PID) control method, the root mean square of position tracking error is reduced by approximately 12.8% and 17.3% under no-load and load conditions, respectively. By compensating for position errors online, the accuracy of the EMA position can be improved.
引用
收藏
页数:17
相关论文
共 50 条
  • [11] Regionalized compensation method for nonlinear error control
    Wei, Wei
    Tang, Qingchun
    Wang, Yutao
    Wang, Taizi
    Zhang, Chenyang
    Pan, Yingguang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (9-10): : 3923 - 3936
  • [12] Research on morphology measurement error compensation method based on the monocular structure light
    Li M.
    Ma K.
    Xu Y.
    Wang F.
    Li, Maoyue (lmy0500@163.com), 1600, Science Press (41): : 19 - 31
  • [13] Research on modeling and compensation method for ground level error based on mobile manipulator
    Guo, Shuai
    Yue, Chengtao
    Song, Tao
    Jia, Qibo
    International Journal of Mechatronics and Applied Mechanics, 2019, 2019 (05): : 179 - 186
  • [14] A Positioning Error Compensation Method for a Mobile Measurement System Based on Plane Control
    Shi, Bo
    Zhang, Fan
    Yang, Fanlin
    Lyu, Yanquan
    Zhang, Shun
    Li, Guoyu
    SENSORS, 2020, 20 (01)
  • [15] Gear Inspection and Error Compensation Control Method Based on Coordinate Measuring Machine
    Meng, Zhaojun
    Cui, Xuemiao
    Jiang, Lianzhi
    He, Xuejun
    PROCEEDINGS OF THE 2019 14TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2019), 2019, : 2393 - 2398
  • [16] Research on wave active compensation control method based on control time delay
    Ma, Tianyu
    Wei, Yanhui
    Wang, Yueyue
    Zhang, Helong
    Han, Yuntao
    2022 OCEANS HAMPTON ROADS, 2022,
  • [17] A New Method of Error Compensation for Numerical Control System
    夏蔚军
    吴智铭
    李济顺
    张洛平
    Journal of Shanghai University, 2003, (04) : 395 - 398
  • [18] Interpolation error compensation method for PMSM torque control
    Lee J.-H.
    Transactions of the Korean Institute of Electrical Engineers, 2018, 67 (03): : 391 - 397
  • [19] Research on nonlinear polynomial least square error compensation based on method DEWE 2010
    He, C.
    Dong, G. L.
    Li, Q.
    Ye, M. Y.
    Manufacturing and Engineering Technology, 2015, : 467 - 470
  • [20] Research on iterative compensation method for springback control based on implicit equation
    Zhenkai Mu
    Rui Ma
    Jun Zhao
    Gaochao Yu
    Honglei Sun
    International Journal of Material Forming, 2021, 14 : 1097 - 1108