Research on the EMA Control Method Based on Transmission Error Compensation

被引:0
|
作者
Zhang, Pan [1 ]
Shi, Zhaoyao [1 ]
Yu, Bo [1 ]
Qi, Haijiang [1 ]
机构
[1] Beijing Univ Technol, Beijing Engn Res Ctr Precis Measurement Technol &, 100 Pingleyuan, Beijing 100124, Peoples R China
基金
中国国家自然科学基金;
关键词
permanent magnet synchronous motor; harmonic drive; transmission error compensation; automatic disturbance rejection control; root mean square error; SLIDING MODE CONTROL; HARMONIC DRIVE; ACTIVE-DISTURBANCE; SYSTEM; SPEED; REJECTION; ADRC;
D O I
10.3390/en17112528
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This research investigates the impact of nonlinear clearance factors on position tracking accuracy in the servo drive system of a harmonic reducer. The study introduces a technique for modeling and compensating for transmission errors, thereby improving position tracking accuracy through online compensation combined with an auto-disturbance rejection controller. Initially, the mathematical model of the permanent magnet synchronous motor is outlined, and the current loop and speed loop control models are derived. Subsequently, an electromechanical actuator (EMA) simulation model with clearance is established, and detailed simulation analysis is conducted to verify the impact of clearance on tracking accuracy. A model for online compensation of transmission errors is then developed. Following the principles of active disturbance rejection control (ADRC), a second-order ADRC is formulated for real-time compensation of transmission errors in EMA position mode. Finally, through no-load and load experiments, the change in position tracking error with and without transmission error compensation is compared and analyzed. The results demonstrate that utilizing automatic disturbance rejection control with transmission error compensation achieves the highest position tracking accuracy. Compared to the proportion integration differentiation (PID) control method, the root mean square of position tracking error is reduced by approximately 12.8% and 17.3% under no-load and load conditions, respectively. By compensating for position errors online, the accuracy of the EMA position can be improved.
引用
收藏
页数:17
相关论文
共 50 条
  • [1] An adaptive compensation control method for the transmission error of the mechanical system based on the characteristic model
    Ren W.
    Wu Y.
    Du R.
    International Journal of Manufacturing Technology and Management, 2023, 37 (3-4) : 241 - 256
  • [2] The AGPM Control Error Compensation Research
    Tan, Wei
    Yu, Bo
    Yu, Zheng-Lin
    2016 INTERNATIONAL CONFERENCE ON MECHANICS DESIGN, MANUFACTURING AND AUTOMATION (MDM 2016), 2016, : 597 - 600
  • [3] The experimental research on gear eccentricity error of backlash-compensation gear device based on transmission error
    Yu, Li
    Wang, Guangjian
    Zou, Shuaidong
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2018, 19 (01) : 5 - 12
  • [4] The experimental research on gear eccentricity error of backlash-compensation gear device based on transmission error
    Li Yu
    Guangjian Wang
    Shuaidong Zou
    International Journal of Precision Engineering and Manufacturing, 2018, 19 : 5 - 12
  • [5] Research on error compensation method of encoder signal based on cloud computing
    Sun, Yanjun
    Zhao, Haiyan
    Liu, Juanjuan
    INTERNATIONAL JOURNAL OF AUTONOMOUS AND ADAPTIVE COMMUNICATIONS SYSTEMS, 2021, 14 (04) : 384 - 397
  • [6] Research on Localization Method Based on RSSI Ranging-Error Compensation
    Jin Rencheng
    Peng Bo
    Meng Lisha
    Gao Teng
    2009 5TH INTERNATIONAL CONFERENCE ON WIRELESS COMMUNICATIONS, NETWORKING AND MOBILE COMPUTING, VOLS 1-8, 2009, : 3594 - 3596
  • [7] Research on error control and compensation in magnetorheological finishing
    Dai, Yifan
    Hu, Hao
    Peng, Xiaoqiang
    Wang, Jianmin
    Shi, Feng
    APPLIED OPTICS, 2011, 50 (19) : 3321 - 3329
  • [8] Research on A Method of PID Error Compensation in Turning
    Li Zhuo
    Lu Jun
    Wang Yu-kun
    MANAGEMENT, MANUFACTURING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 452-453 : 110 - 115
  • [9] An Elastic Transmission Error Compensation Method for Rotary Vector Speed Reducers Based on Error Sensitivity Analysis
    Hu, Yuhao
    Li, Gang
    Zhu, Weidong
    Cui, Jiankun
    APPLIED SCIENCES-BASEL, 2020, 10 (02):
  • [10] Regionalized compensation method for nonlinear error control
    Wei Wei
    Qingchun Tang
    Yutao Wang
    Taizi Wang
    Chenyang Zhang
    Yingguang Pan
    The International Journal of Advanced Manufacturing Technology, 2022, 122 : 3923 - 3936