共 50 条
The impact of the epoxy thin-film layer for microwave-based gas sensors working at high relative humidity levels
被引:0
|作者:
Grochala, Dominik
[1
]
Paleczek, Anna
[1
]
Kocon, Mateusz
[1
]
Dudzik, Maciej
[1
]
Blajszczak, Lukasz
[2
]
Staszek, Kamil
[3
]
Wojcikowski, Marek
[4
]
Cao, Tuan-Vu
[5
]
Rydosz, Artur
[1
]
机构:
[1] AGH Univ Krakow, Biomarkers Anal LAB, Al Mickiewicza 30, PL-30059 Krakow, Poland
[2] AGH Univ Krakow, Dept Surface Engn & Mat Characterizat, Al Mickiewicza 30, PL-30059 Krakow, Poland
[3] AGH Univ Krakow, Microwave Res Grp, Al Mickiewicza 30, PL-30059 Krakow, Poland
[4] Gdansk Univ Technol, Dept Microelect Syst, Narutowicza 11-12, PL-80233 Gdansk, Poland
[5] Norwegian Inst Air Res, Kjeller, Norway
关键词:
D O I:
10.46620/URSIATRASC24/ELJV5678
中图分类号:
TM [电工技术];
TN [电子技术、通信技术];
学科分类号:
0808 ;
0809 ;
摘要:
In this paper, the impact of the epoxy thin-film layer on microwave-based gas sensors working at 50% and 90% relative humidity levels is discussed. The microwave-based gas sensor was designed in the form of a meander-type transmission line working at 5.8 GHz with an eight-port reflectometer part. The gas-sensing layer was designed based on the thin tin dioxide film deposited by the utilization of magnetron sputtering technology and an additional epoxy thin-film layer was used. The obtained results have shown that by application of a thin epoxy layer, the impact of the high RH levels for gas sensor response can be reduced. The obtained results can be used to further optimize the microwave-based sensing elements for various applications including gas sensors where high relative humidity levels are expected to exist.
引用
收藏
页数:4
相关论文