FINITE ELEMENT ANALYSIS OF THE EFFECT OF POROSITY ON THE PLASTICITY AND DAMAGE BEHAVIOR OF MG AZ31 AND AL 6061 T651 ALLOYS

被引：0

作者：

Perkins, Allen ^{[1
]}

Yang, Wenhua ^{[1
]}

Liu, Yucheng ^{[1
]}

Chen, Lei ^{[1
]}

Yenusah, Caleb ^{[1
]}

机构：

[1] Mississippi State Univ, Mississippi State, MS 39762 USA

来源：

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 9 | 2020年

关键词：

MAGNESIUM ALLOY; FAILURE ANALYSIS; YIELD STRENGTH; MICROSTRUCTURE; CORROSION; EVOLUTION; SHEET;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Porosity has been known to have a profound effect on a material's mechanical properties, often weakening the material. Highly porous metallic materials prove troublesome for supporting a load-based structure due to the voids that are present throughout the microstructure of the material. In this study, the previously developed ISV damage plasticity model is used to investigate the effect of the porosity on aluminum alloy 6061-T651 and magnesium alloy AZ31 through finite element analysis (FEA). It is determined that porosity has a profound impact on the strength of the aluminum alloy and much lesser effect on the magnesium alloy. Porosity is also shown to affect other properties of the materials, such as the hardness and pore growth.

引用

页数：9

共 35 条

[31] Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder
Shude Ji
Ruofei Huang
Xiangchen Meng
Liguo Zhang
Yongxian Huang
Journal of Materials Engineering and Performance, 2017, 26 : 2359 - 2367
[32] Effect of tool rotational speed and position on mechanical and microstructural properties of friction stir welded dissimilar alloys AZ31B Mg and Al6061
Tolun, Fatmagül
Materialpruefung/Materials Testing, 2022, 64 (05): : 714 - 725
[33] Effect of tool rotational speed and position on mechanical and microstructural properties of friction stir welded dissimilar alloys AZ31B Mg and Al6061
Tolun, Fatmagul
MATERIALS TESTING, 2022, 64 (05) : 714 - 725
[34] Effect of Pin Length and Rotation Speed on the Microstructure and Mechanical Properties of Friction Stir Welded Lap Joints of AZ31B-H24 Mg Alloy and AA6061-T6 Al Alloy
Anil Bandi
Srinivasa R. Bakshi
Metallurgical and Materials Transactions A, 2020, 51 : 6269 - 6282
[35] Effect of Pin Length and Rotation Speed on the Microstructure and Mechanical Properties of Friction Stir Welded Lap Joints of AZ31B-H24 Mg Alloy and AA6061-T6 Al Alloy
Bandi, Anil
Bakshi, Srinivasa R.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (12): : 6269 - 6282

← 1 2 3 4 →