FINITE ELEMENT ANALYSIS OF THE EFFECT OF POROSITY ON THE PLASTICITY AND DAMAGE BEHAVIOR OF MG AZ31 AND AL 6061 T651 ALLOYS

被引：0
|
作者：
Perkins, Allen [1 ]
Yang, Wenhua [1 ]
Liu, Yucheng [1 ]
Chen, Lei [1 ]
Yenusah, Caleb [1 ]
机构：
[1] Mississippi State Univ, Mississippi State, MS 39762 USA
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 9 | 2020年
关键词：
MAGNESIUM ALLOY; FAILURE ANALYSIS; YIELD STRENGTH; MICROSTRUCTURE; CORROSION; EVOLUTION; SHEET;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Porosity has been known to have a profound effect on a material's mechanical properties, often weakening the material. Highly porous metallic materials prove troublesome for supporting a load-based structure due to the voids that are present throughout the microstructure of the material. In this study, the previously developed ISV damage plasticity model is used to investigate the effect of the porosity on aluminum alloy 6061-T651 and magnesium alloy AZ31 through finite element analysis (FEA). It is determined that porosity has a profound impact on the strength of the aluminum alloy and much lesser effect on the magnesium alloy. Porosity is also shown to affect other properties of the materials, such as the hardness and pore growth.
引用
收藏
页数：9
相关论文
共 35 条
  • [21] Material Flow Behavior and Mechanical Properties of Dissimilar Friction Stir Welded Al 7075 and Mg AZ31 Alloys Using Cd Interlayer
    Dewangan, Satya Kumar
    Tripathi, M. K.
    Manoj, M. K.
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (05) : 1169 - 1183
  • [22] Effect of vertical and horizontal zinc interlayer on material flow, microstructure, and mechanical properties of dissimilar FSW of Al 7075 and Mg AZ31 alloys
    Satya Kumar Dewangan
    Pragya Nandan Banjare
    Manwendra Kumar Tripathi
    Manoranjan Kumar Manoj
    The International Journal of Advanced Manufacturing Technology, 2023, 126 : 4453 - 4474
  • [23] Effect of vertical and horizontal zinc interlayer on material flow, microstructure, and mechanical properties of dissimilar FSW of Al 7075 and Mg AZ31 alloys
    Dewangan, Satya Kumar
    Banjare, Pragya Nandan
    Tripathi, Manwendra Kumar
    Manoj, Manoranjan Kumar
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (9-10): : 4453 - 4474
  • [24] Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy
    Woong-Seong Chang
    S.R.Rajesh
    Chang-Keun Chun
    Heung-Ju Kim
    JournalofMaterialsScience&Technology, 2011, 27 (03) : 199 - 204
  • [25] Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy
    Chang, Woong-Seong
    Rajesh, S. R.
    Chun, Chang-Keun
    Kim, Heung-Ju
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2011, 27 (03) : 199 - 204
  • [26] Effect of Tension Temperature on the Anisotropy of Tensile Behavior for Az31 Alloys: A Visco-Plastic Self-Consistent Analysis
    Wenke Wang
    Jaimyun Jung
    Chao Cui
    Wenzhen Chen
    Yang Yu
    Peng Li
    Wencong Zhang
    Renlong Xiong
    Hyoung Seop Kim
    Metals and Materials International, 2023, 29 : 908 - 921
  • [27] Effect of Tension Temperature on the Anisotropy of Tensile Behavior for Az31 Alloys: A Visco-Plastic Self-Consistent Analysis
    Wang, Wenke
    Jung, Jaimyun
    Cui, Chao
    Chen, Wenzhen
    Yu, Yang
    Li, Peng
    Zhang, Wencong
    Xiong, Renlong
    Kim, Hyoung Seop
    METALS AND MATERIALS INTERNATIONAL, 2023, 29 (04) : 908 - 921
  • [28] Finite element analysis of magnesium AZ31 alloy sheet in warm deep-drawing process considering heat transfer effect
    El-Morsy, AW
    Manabe, KI
    MATERIALS LETTERS, 2006, 60 (15) : 1866 - 1870
  • [29] Effect of Precipitation-Free Zone on Fatigue Properties in Al-7.02Mg-1.98Zn Alloys: Crystal Plasticity Finite Element Analysis
    Chen, Xin
    Zheng, Xiaoyu
    Pan, Meichen
    Liu, Yuling
    Kong, Yi
    Hartmaier, Alexander
    Li, Liya
    Du, Yong
    MATERIALS, 2024, 17 (22)
  • [30] Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder
    Ji, Shude
    Huang, Ruofei
    Meng, Xiangchen
    Zhang, Liguo
    Huang, Yongxian
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (05) : 2359 - 2367
1234