Constraint effects on fracture toughness of ductile cast iron in the ductile regime

被引：1
|
作者：
Lindqvist, S. [1 ]
Kuutti, J. [1 ]
Sirkia, L. [1 ]
Forsstrom, A. [1 ]
机构：
[1] VTT, Kemistintie 3, Espoo 02660, Finland
来源：
ENGINEERING FRACTURE MECHANICS | 2024年 / 306卷
关键词：
Ductile cast iron; Constraint; J -R curve; Fracture toughness; RESISTANCE CURVES; SCALE; DCI;
D O I：
10.1016/j.engfracmech.2024.110202
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
To assess the effect of constraint loss on fracture toughness of ductile cast iron (DCI), GJS-400-15, in the ductile regime at 0 degrees C, the fracture toughness was characterised with two different types of fracture toughness specimens, compact tension (C(T)) and single edge tension (SE(T)) specimens. The constraint state in the specimens was quantified using finite element analysis. Overall, the constraint dependence of fracture toughness for DCI is comparable to typical ferritic structural steels. For the obtained J-R curves, the fracture toughness increases as the crack grows, and the crack growth is stable on macroscopic scale up to J = 290 kJ/m2. Independent of the constraint state in the stable crack growth regime, the global failure mechanism is ductile fracture, including occasional local brittle areas.
引用
收藏
页数：18
相关论文
共 50 条
  • [41] Determining Ductile Fracture Toughness in Metals
    Chen, Xiang Frank
    Nanstad, Randy K.
    Sokolov, Mikhail A.
    Manneschmidt, Eric T.
    ADVANCED MATERIALS & PROCESSES, 2014, 172 (04): : 19 - 23
  • [42] Elastic Fracture Toughness of Ductile Materials
    Yang, Wei
    Fu, Guoyang
    Li, Chun-Qing
    JOURNAL OF ENGINEERING MECHANICS, 2017, 143 (09)
  • [43] Variability and Lower Bound of Fracture Toughness of Welds in the Ductile to Brittle transition regime
    Schindler, H. J.
    Kalkhof, D.
    Viehrig, H. W.
    20TH EUROPEAN CONFERENCE ON FRACTURE, 2014, 3 : 732 - 737
  • [44] Determination of Vickers indentation fracture toughness of boronised alloyed ductile iron
    Toktas, A.
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2019, 97 (05): : 271 - 276
  • [45] Influence of austenitizing temperature on fracture toughness of a low manganese austempered ductile iron (ADI) with ferritic as cast structure
    Putatunda, SK
    Gadicherla, PK
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 268 (1-2): : 15 - 31
  • [46] Influence of austenitizing temperature on fracture toughness of a low manganese austempered ductile iron (ADI) with ferritic as cast structure
    Wayne State Univ, Detroit, United States
    Mater Sci Eng A Struct Mater Prop Microstruct Process, 1 (15-31):
  • [47] Influence of stepped austempering process on the fracture toughness of austempered ductile iron
    Hsu, CH
    Chuang, TL
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (10): : 2509 - 2514
  • [48] Research on embrittlement of fracture toughness in Austempered Ductile Iron by contact with water
    Cai, Qizhou
    Wei, Bokang
    Tanaka, Yuichi
    Komastsu, Shinichiro
    Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2004, 32 (01): : 19 - 21
  • [49] Influence of stepped austempering process on the fracture toughness of austempered ductile iron
    Cheng-Hsun Hsu
    Tao-Liang Chuang
    Metallurgical and Materials Transactions A, 2001, 32 : 2509 - 2514
  • [50] As-cast austempered ductile cast iron
    Hui, Mengjun
    Li, Chaorong
    Liang, Ji
    Liu, Bokai
    Wu, Dehai
    Jixie goneheng Xuebao, 1988, 24 (02): : 6 - 11
12345